SAE Specifications

SAE SPECIFICATION

 

SAE  SPECIFICATIONS
SAE No. En      Eqvt C Mn Si Cr Ni Mo S P Others
1005 0.06 max 0.35 max 0.05 0.04
1006 0.08 max 0.25/0.40 0.05 0.04
1008 0.10 max 0.30/0.50 0.05 0.04
1010 2A 0.08/0.13 0.30/0.60 0.05 0.04
1011 0.08/0.13 0.60/0.90 0.05 0.04
1012 2B 0.10/0.15 0.30/0.60 0.05 0.04
1013 0.11/0.16 0.50/0.60 0.05 0.04
1015 2C 0.13/018 0.30/0.60 0.05 0.04
1016 0.13/0.80 0.60/0.90 0.05 0.04
1017 0.15/0.20 0.30/0.60 0.05 0.04
1018 3A 0.15/0.20 0.60/0.90 0.05 0.04
1019 0.15/0.20 0.70/1.00 0.05 0.04
1020 2D 0.18/0.23 0.30/0.60 0.05 0.04
1021 0.18/0.23 0.60/0.90 0.05 0.04
1022 3D 0.18/0.23 0.70/1.00 0.05 0.04
1023 0.20/0.25 0.30/0.60 0.05 0.04
1024 0.19/0.25 1.35/1.65 0.05 0.04
1025 0.22/0.28 0.30/0.60 0.05 0.04
1026 4 0.22/0.28 0.60/0.90 0.05 0.04
1027 0.22/0.29 1.20/1.50 0.05 0.04
1028 0.25/0.31 0.60/0.90 0.05 0.04
1030 5D 0.28/0.34 0.60/0.90 0.05 0.04
1035 8A 0.32/0.38 0.60/0.90 0.05 0.04
1036 0.30/0.27 1.20/1.50 0.05 0.04
1037 8B 0.32/0.38 0.70/1.00 0.05 0.04
1038 8B 0.35/0.42 0.60/0.90 0.05 0.04
1038H 0.34/0.43 0.50/1.00 0.15/0.30 0.05 0.04
1039 8C 0.37/0.44 0.70/1.00 0.05 0.04
1040 8 0.37/0.44 0.60/0.90 0.05 0.04
1041* 0.36/0.44 1.35/1.65 0.05 0.04
1042 8D 0.40/0.47 0.60/0.90 0.05 0.04
1043 0.40/0.47 0.70/1.00 0.05 0.04
1044 0.43/0.50 0.30/0.60 0.05 0.04
1045 8D 0.43/0.50 0.60/0.90 0.05 0.04
1045H 0.42/0.51 0.05/1.00 0.15/0.30 0.05 0.04
1046 0.43/0.50 0.70/1.00 0.05 0.04
1047 0.43/0.51 1.35/1.65 0.05 0.04
1048 0.44/0.52 1.10/1.40 0.05 0.04
1049 0.44/0.52 0.60/0.90 0.05 0.04
1050 43 0.48/0.55 0.60/0.90 0.05 0.04
1051 0.45/0.56 0.85/1.15 0.05 0.04
1052 0.47/0.55 1.20/1.50 0.05 0.04
1053 0.48/0.55 0.70/1.00 0.05 0.04
1055 9 0.50/0.60 0.60/0.90 0.05 0.04
1060 0.55/0.65 0.60/0.90 0.05 0.04
1061 0.55/0.65 0.75/1.05 0.05 0.04
1064 0.60/0.70 0.50/0.80 0.05 0.04
1065 42B 0.60/0.70 0.60/0.90 0.05 0.04
1066 0.60/0.71 0.85/1.15 0.05 0.04
1069 0.65/0.75 0.40/0.70 0.05 0.04
1070 0.65/0.75 0.60/0.90 0.05 0.04
1072 0.65/0.76 1.00/1.30 0.05 0.04
1074 0.70/0.80 0.50/0.80 0.05 0.04
1075 0.70/0.80 0.40/0.70 0.05 0.04
1078 0.72/0.85 0.30/0.60 0.05 0.04
1080 0.75/0.88 0.60/0.90 0.05 0.04
1084 0.80/0.93 0.60/0.90 0.05 0.04
1085 0.80/0.93 0.70/1.00 0.05 0.04
1086 0.80/0.93 0.30/050 0.05 0.04
1090 0.85/0.98 0.60/0.90 0.05 0.04
1095 0.90/1.03 0.30/0.50 0.05 0.04
1108 0.80/0.13 0.50/0.80 0.08/0.13 0.04
1109 0.08/0.13 0.60/0.90 0.08/0.13 0.04
1110 0.80/0.13 0.30/0.60 0.08/0.13 0.04
1116 0.14/0.20 1.10/1.40 0.16/0.23 0.04
1117 32M 0.14/0.20 1.00/1.30 0.08/0.13 0.04
1118 7A 0.14/0.20 1.30/1.60 0.08/0.13 0.04
1119 0.14/0.20 1.00/1.30 0.24/0.33 0.04
1132 0.27/0.34 1.35/1.65 0.08/0.13 0.04
1137 15AM 0.32/0.39 1.35/1.65 0.08/0.13 0.04
1139 0.35/0.43 1.35/1.65 0.13/0.20 0.04
1140 8M 0.37/0.44 0.70/1.00 0.08/0.13 0.04
1141 0.37/0.45 0.35/1.65 0.08/0.13 0.04
1144 0.40/0.48 1.35/1.65 0.24/0.33 0.04
1145 0.42/0.49 0.70/1.00 0.40/0.07 0.04
1146 0.42/0.49 0.70/1.00 0.08/0.13 0.04
1151 0.48/0.55 0.70/1.00 0.08/0.13 0.04
1211 0.13 max 0.60/0.90 0.10/0.15 0.04
1212 0.13 max 0.70/1.00 0.16/0.23 0.07/0.12
1213 1A 0.13 max 0.70/1.00 0.24/0.70 0.07/0.12
1215 1A 0.09 max 0.75/1.05 0.26/0.35 0.04/0.09
12L13 1AL 0.13 max 0.70/1.00 0.24/0.33 0.07/0.12 Pb-0.15/0.30
12L14 1AL 0.15 max 0.85/1.15 0.26/0.35 0.04/0.09 Pb-0.15/0.35
1330 0.28/0.33 1.60/1.90 0.15/0.30 0.04 0.03
1330H 0.27/0.33 1.45/2.05 0.15/0.30
1335 0.33/0.38 1.60/1.90 0.15/0.30 0.04 0.03
1335H 0.32/0.38 1.45/2.05 0.15/0.30
1340 0.38/0.43 1.60/1.90 0.15/0.30 0.04 0.03
1340H 0.37/0.44 1.45/2.05 0.15/0.30
1345 0.43/0.48 1.60/1.90 0.15/0.30 0.04 0.03
1345H 0.42/0.49 1.45/2.05 0.15/0.30
1513 0.10/0.16 1.10/1.40 0.05 0.04
1518 0.15/0.21 1.10/1.40 0.15/0.30 0.05 0.04
1522 0.18/0.24 1.10/1.40 0.05 0.04
1522H 0.17/0.25 1.00/1.50 0.15/0.30 0.05 0.04
1524 0.19/0.25 1.35/1.65 0.05 0.04
1524H 0.18/0.26 1.25/1.75 0.15/0.30 0.05 0.04
1525 0.23/0.29 0.80/1.00 0.05 0.04
1526 0.22/0.29 1.10/1.40 0.05 0.04
1526H 0.21/0.30 1.00/1.50 0.15/0.30 0.05 0.04
1527 0.22/0.29 1.20/1.50 0.05 0.04
1536 0.30/0.37 1.20/1.50 0.05 0.04
1541 0.36/0.44 1.35/1.65 0.05 0.04
1541H 0.35/0.45 1.25/1.75 0.15/0.30 0.05 0.04
1547 0.43/0.51 1.35/1.65 0.05 0.04
1548 0.44/0.52 1.10/1.40 0.05 0.04
1551 0.45/0.56 0.85/1.15 0.05 0.04
1552 0.47/0.55 1.20/1.50 0.05 0.04
1561 0.55/0.65 0.75/1.05 0.05 0.04
1566 0.60/0.71 0.85/1.15 0.05 0.04
1572 0.65/0.76 1.00/1.30 0.05 0.04
4012 0.09/0.14 0.75/1.00 0.15/0.30 0.15/0.25 0.04 0.03
4023 0.20/0.25 0.70/0.90 0.15/0.30 0.20/0.30 0.04 0.03
4024 0.20/0.25 0.70/0.90 0.15/0.30 0.20/0.30 0.03/0.05 0.03
4027 0.25/0.30 0.70/0.90 0.15/0.30 0.20/0.30 0.04 0.03
4027H 0.24/0.30 0.60/1.00 0.15/0.30 0.20/0.30
4028 0.25/0.30 0.70/0.90 0.15/0.30 0.20/0.30 0.03/0.05 0.03
4032 16 0.30/0.35 0.70/0.90 0.15/0.30 0.20/0.30 0.04 0.03
4032H 0.29/0.35 0.60/1.00 0.15/0.30 0.20/0.30
4037 16 0.35/0.40 0.70/0.90 0.15/0.30 0.20/0.30 0.04 0.03
4037H 0.34/0.41 0.60/1.00 0.15/0.30 0.20/0.30
4042 0.40/0.45 0.70/0.90 0.15/0.30 0.20/0.30 0.04 0.03
4042H 0.39/0.46 0.60/1.00 0.15/0.30 0.20/0.30
4047 0.45/0.50 0.70/0.90 0.15/0.30 0.20/0.30 0.04 0.03
4047H 0.44/0.51 0.60/1.00 0.15/0.30 0.20/0.30
4118 0.18/0.23 0.70/0.90 0.15/0.30 0.08/0.15 0.08/0.15 0.04 0.03
4118H 0.17/0.23 0.60/1.00 0.15/0.30 0.30/0.70 0.08/0.15
4130 0.28/0.33 0.40/0.60 0.15/0.30 0.8/1.10 0.15/0.25 0.04 0.03
4130H 0.27/0.33 0.30/0.70 0.15/0.30 0.75/1.20 0.15/0.25
4135 0.33/0.38 0.70/0.90 0.15/0.30 0.75/1.20 0.15/0.25 0.04 0.03
4135H 0.32/0.38 0.60/1.00 0.15/0.30 0.75/1.20 0.15/0.25
4137 19A 0.35/0.40 0.70/0.90 0.15/0.30 0.8/1.10 0.15/0.25 0.04 0.03
4137H 0.34/0.41 0.60/1.00 0.15/0.30 0.75/1.20 0.15/0.25
4137H 0.34/0.41 0.60/1.00 0.15/0.30 0.75/1.20 0.15/0.25
4140 19B 0.38/0.43 0.70/0.90 0.15/0.30 0.8/1.10 0.15/0.25 0.04 0.03
4140H 0.37/0.54 0.65/1.10 0.15/0.30 0.75/1.20 0.15/0.25
4142 19B 0.40/0.45 0.75/1.00 0.15/0.30 0.8/1.10 0.15/0.25 0.04 0.03
4142H 0.39/0.46 0.65/1.10 0.15/0.30 0.75/1.20 0.15/0.25
4145 0.43/0.48 0.75/1.00 0.15/0.30 0.8/1.10 0.15/0.25 0.04 0.03
4145H 0.42/0.49 0.65/1.10 0.15/0.30 0.75/1.20 0.15/0.25
4147 0.45/0.50 0.75/1.00 0.15/0.30 0.8/1.10 0.15/0.25 0.04 0.03
4147H 0.44/0.51 0.65/1.10 0.15/0.30 0.75/1.20 0.15/0.25
4150 0.48/0.53 0.75/1.00 0.15/0.30 0.8/1.10 0.15/0.25 0.04 0.03
4150H 0.47/0.54 0.65/1.10 0.15/0.30 0.75/1.20 0.15/0.25 0.04 0.03
4161 0.56/0.64 0.75/1.00 0.15/0.30 0.7/0.90 0.15/0.25 0.04 0.03
4161H 0.55/0.65 0.65/1.10 0.15/0.30 0.65/0.95 0.25/0.35
4320 0.17/0.22 0.45/0.65 0.15/0.30 0.40/0.60 1.65/2.00 0.20/0.30 0.04 0.03
4320H 0.17/0.23 0.40/0.70 0.15/0.30 0.35/0.65 1.55/2.00 0.20/0.30
4340 24 0.38/0.43 0.60/0.80 0.15/0.30 0.70/0.90 1.65/2.00 0.20/0.30 0.04 0.03
4340H 0.37/0.44 0.55/0.90 0.15/0.30 0.65/0.95 1.55/2.00 0.20/0.30
4419 0.18/0.23 0.45/0.65 0.15/0.30 0.45/0.60 0.04 0.03
4419H 0.17/0.23 0.35/0.75 0.15/0.30 0.45/0.60
4422 0.20/0.25 0.70/0.90 0.15/0.30 0.35/0.45 0.04 0.03
4447 0.24/0.29 0.70/0.90 0.15/0.30 0.35/0.45 0.04 0.03
4615 0.13/0.18 0.45/0.65 0.15/0.30 1.65/2.00 0.20/0.30 0.04 0.03
4617 0.15/0.20 0.45/0.65 0.15/0.30 1.65/2.00 0.20/0.30 0.04 0.03
4620 0.17/0.22 0.45/0.65 0.15/0.30 1.65/2.00 0.20/0.30 0.04 0.03
4620H 0.17/0.23 0.35/0.75 0.15/0.30 1.55/2.00 0.20/0.30
4621 0.18/0.23 0.70/0.90 0.15/0.30 1.65/2.00 0.20/0.30 0.04 0.03
4621H 0.17/0.23 0.60/1.00 0.15/0.30 1.55/2.00 0.20/0.30
4626 0.24/0.29 0.45/0.65 0.15/0.30 0.70/1.00 0.15/0.25 0.04 0.03
4718 0.16/0.21 0.70/0.90 0.35/0.55 0.90/1.20 0.30/0.40 0.04 0.03
4718H 0.15/0.21 0.60/0.95 0.15/0.30 0.30/0.60 0.85/1.25 0.30/0.40
4720 0.17/0.22 0.50/0.70 0.15/0.30 0.35/0.55 0.90/1.20 0.15/0.25 0.04 0.03
4720H 0.17/0.23 0.45/0.75 0.15/0.30 0.30/0.60 0.85/1.25 0.15/0.25
4815 0.13/0.18 0.40/0.60 0.15/0.30 3.25/3.75 0.20/0.30 0.04 0.03
4815H 0.12/0.18 0.30/0.70 0.15/0.30 3.20/3.80 0.20/0.30
4817 0.15/0.20 0.40/0.60 0.15/0.30 3.25/3.75 0.20/0.30 0.04 0.03
4817H 0.14/0.20 0.30/0.70 0.15/0.30 3.20/3.80 0.20/0.30
4820 0.18/0.23 0.40/0.60 0.15/0.30 3.25/3.75 0.20/0.30 0.04 0.03
4820H 0.17/0.23 0.40/0.80 0.15/0.30
5015 206 0.12/0.17 0.30/0.50 0.15/0.30 0.30/0.50 0.04 0.03
5046 0.43/0.48 0.75/1.00 0.15/0.30 0.20/0.35 0.04 0.03
5115 0.13/0.18 0.70/0.90 0.15/0.30 0.70/0.90 0.04 0.03
5120 207 0.17/0.22 0.70/0.90 0.15/0.30 0.70/0.90 0.04 0.03
5120H 0.17/0.23 0.60/1.00 0.15/0.30 0.60/1.00
5130 18A 0.28/0.33 0.70/0.90 0.15/0.30 0.80/1.10 0.04 0.03
5130H 0.27/0.33 0.60/1.10 0.15/0.30 0.75/1.20
5132 18B 0.30/0.35 0.70/0.90 0.15/0.30 0.75/1.00 0.04 0.03
5132H 0.29/0.35 0.50/0.90 0.15/0.30 0.65/1.10
5135 18C 0.33/0.38 0.70/0.90 0.15/0.30 0.80/1.05 0.04 0.03
5135H 0.32/0.38 0.50/0.90 0.15/0.30 0.70/1.15
5140 18D 0.38/0.43 0.70/0.90 0.15/0.30 0.70/0.90 0.04 0.03
5140H 0.37/0.44 0.60/1.00 0.15/0.30 0.60/1.00
5145 0.43/0.48 0.75/1.00 0.15/0.30 0.70/0.90 0.04 0.03
5145H 0.42/0.49 0.60/1.00 0.15/0.30 0.60/1.00
5147 0.46/0.51 0.75/1.00 0.15/0.30 0.85/1.15 0.04 0.03
5147H 0.45/0.52 0.60/1.00 0.15/0.30 0.80/1.25
5150 0.48/0.53 0.70/0.90 0.15/0.30 0.70/0.90 0.04 0.03
5150H 0.47/0.54 0.60/1.00 0.15/0.30 0.60/1.00
5155 0.51/0.59 0.70/0.90 0.15/0.30 0.70/0.90 0.04 0.03
5155H 0.50/0.80 0.60/1.00 0.15/0.30 0.60/1.00
5160 0.56/0.64 0.75/1.00 0.15/0.30 0.70/0.90 0.04 0.03
5160H 0.55/0.65 0.60/1.00 0.15/0.30 0.60/1.00
6118 0.16/0.21 0.50/0.70 0.15/0.30 0.50/0.70 0.04 0.03 V-0.10/0.15
6118H 0.15/0.21 0.40/0.80 0.15/0.30 0.40/0.80 V-0.10/0.15
6150 0.48/0.53 0.70/0.90 0.15/0.30 0.80/1.10 0.04 0.03 V-0.15 min
6150H 0.47/0.54 0.60/1.00 0.15/0.30 0.75/1.20 V-0.15 min
6815 0.13/0.18 0.70/0.90 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8115 0.13/0.18 0.70/0.90 0.15/0.30 0.30/0.50 0.20/0.40 0.08/0.15 0.04 0.03
8617 0.15/0.20 0.70/0.90 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8617H 0.14/0.20 0.60/0.95 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8620 362 0.18/0.23 0.70/0.90 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8620H 0.17/0.23 0.60/0.95 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8622 0.20/0.25 0.70/0.90 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8622H 0.19/0.25 0.60/0.95 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8625 0.23/0.28 0.70/0.90 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8625H 0.22/0.28 0.60/0.95 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8627 0.25/0.30 0.70/0.90 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8627H 0.24/0.30 0.60/0.95 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8630 0.28/0.33 0.70/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8630H 0.27/0.33 0.60/0.95 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8637 0.35/0.40 0.70/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8637H 0.34/0.41 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8640 0.38/0.43 0.70/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8640H 0.37/0.44 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8642 0.40/0.45 0.70/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8642H 0.39/0.46 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8645 0.43/0.48 0.70/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8645H 0.42/0.49 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8650 0.48/0.53 0.70/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8650H 0.47/0.54 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8655 0.51/0.59 0.70/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8655H 0.50/0.60 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8660 0.56/0.64 0.70/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.15/0.25 0.04 0.03
8660H 0.55/0.65 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.15/0.25
8720 0.18/0.23 0.70/0.90 0.15/0.30 0.40/0.60 0.40/0.70 0.20/0.30 0.04 0.03
8720H 0.17/0.23 0.60/0.95 0.15/0.30 0.35/0.65 0.35/0.75 0.20/0.30
8740 0.38/0.43 0.75/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.20/0.30 0.04 0.03
8740H 0.37/0.44 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.20/0.30
8822 0.20/0.25 0.75/1.00 0.15/0.30 0.40/0.60 0.40/0.70 0.30/0.40 0.04 0.03
8822H 0.19/0.25 0.70/1.05 0.15/0.30 0.35/0.65 0.35/0.75 0.30/0.40
9254 0.51/0.59 0.60/0.80 1.20/1.60 0.60/0.80 0.04 0.03
9255 45 0.51/0.59 0.70/0.95 1.80/2.20 0.04 0.03
9260 45A 0.56/0.64 0.75/1.00 1.80/2.20 0.04 0.03
9260H 0.55/0.65 0.65/1.10 1.70/2.20
9310 0.08/0.13 0.45/0.65 0.15/0.30 1.00/1.40 3.00/3.50 0.08/0.15 0.04 0.03
9310H 0.70/0.13 0.40/0.70 0.15/0.30 1.00/1.45 2.95/3.55 0.80/0.15
50100 0.98/1.10 0.25/0.45 0.15/0.30 0.40/0.60 0.02 0.02
51100 0.98/1.10 0.25/0.45 0.15/0.30 0.90/1.15 0.02 0.02
52100 31 0.98/1.10 0.25/0.45 0.15/0.30 1.30/1.60 0.02 0.02

High Speed Steels

HIGH SPEED STEEL

DIN 1.3207, HS10-4-3-10, SKH57
DIN 1.3243, HS6-5-2-5, ASTM / SAE / AISI M35, JIS SKH55
DIN 1.3247, HS2-9-1-8, ASTM / SAE / AISI M42, JIS SKH59
DIN 1.3343, HS6-5-2C, ASTM / SAE / AISI M2, JIS SKH51

 

Equivalent Grades
American
German
Japanese
China
Poland
(W.Nr)
(DIN)
AISI M2
1.3343
HS6-5-2
SKH51
W6Mo5Cr4V2
SW7M
AISI M35
1.3243
HS6-5-2-5
SKH55
W6Mo5Cr4V2Co5
SK5M
AISI M42
1.3247
HS2-10-1-8
SKH59
W2Mo9Cr4VCo8
SK8M
AISI T1
1.3355

HS18-0-1

SKH2
W18Cr4V
SW18
AISI T4
1.3255
HS18-1-2-5
SKH3
W18Cr4VCo5
-
AISI T5
1.3265
HS18-1-2-10
SKH4
W18Cr4VCo8
-
AISI T42
1.3207
HS10-4-3-10
SKH57
-
SK10V

 

 

C
Si
Mn
P
S
Cr
Mo
V
W
Co
Ni
AISI M2
0.78-0.88
0.20-0.40
0.20-0.40
-
-
3.75-4.50
4.50-5.50
1.60-2.20
5.50-6.75
AISI M35
0.85-0.95
0.00-0.40
0.00-0.40
-
-
3.75-4.50
4.75-5.25
1.75-2.15
6.00-6.75
4.60-5.20
0.00-0.40
AISI M42
1.05-1.15
0.15-0.65
0.15-0.40
-
-
3.50-4.25
9.00-10.00
0.95-1.35
1.15-1.85
7.75-8.75
AISI T1
0.65-0.75
0.20-0.40
0.20-0.40
-
-
3.75-4.50
-
0.90-1.30
17.25-18.75
AISI T4
0.70-0.80
0.20-0.40
0.20-0.40
-
-
3.75-4.50
0.70-1.00
0.80-1.20
17.25-18.75
4.25-5.75
AISI T5
0.75-0.85
0.20-0.40
0.20-0.40
-
-
3.75-4.50
0.70-1.00
1.80-2.40
17.50-19.00
7.00-9.00
AISI T42
1.25-1.40
0.00-0.40
0.00-0.40
-
-
3.75-4.50
2.75-3.50
2.75-3.25
8.50-9.50
9.00-10.00
0.00-0.40

 

 

Equivalent Grades
American
German
Japanese
China
Poland
(W.Nr)
(DIN)
AISI M-2
DIN 1.3343
HS6-5-2
SKH-51
W6Mo5Cr4V2
SW7M
AISI M-35
DIN 1.3243
HS6-5-2-5
SKH-55
W6Mo5Cr4V2Co5
SK5M
AISI M-42
DIN 1.3247
HS2-10-1-8
SKH-59
W2Mo9Cr4VCo8
SK8M
AISI T-1
DIN 1.3355

HS18-0-1

SKH-2
W18Cr4V
SW18
AISI T-4
DIN 1.3255
HS18-1-2-5
SKH-3
W18Cr4VCo5
-
AISI T-5
DIN 1.3265
HS18-1-2-10
SKH-4
W18Cr4VCo8
-
AISI T-42
DIN 1.3207
HS10-4-3-10
SKH-57
-
SK10V

 

 

C
Si
Mn
P
S
Cr
Mo
V
W
Co
Ni
AISI M-2
0.78-0.88
0.20-0.40
0.20-0.40
-
-
3.75-4.50
4.50-5.50
1.60-2.20
5.50-6.75
AISI M-35
0.85-0.95
0.00-0.40
0.00-0.40
-
-
3.75-4.50
4.75-5.25
1.75-2.15
6.00-6.75
4.60-5.20
0.00-0.40
AISI M-42
1.05-1.15
0.15-0.65
0.15-0.40
-
-
3.50-4.25
9.00-10.00
0.95-1.35
1.15-1.85
7.75-8.75
AISI T-1
0.65-0.75
0.20-0.40
0.20-0.40
-
-
3.75-4.50
-
0.90-1.30
17.25-18.75
AISI T-4
0.70-0.80
0.20-0.40
0.20-0.40
-
-
3.75-4.50
0.70-1.00
0.80-1.20
17.25-18.75
4.25-5.75
AISI T-5
0.75-0.85
0.20-0.40
0.20-0.40
-
-
3.75-4.50
0.70-1.00
1.80-2.40
17.50-19.00
7.00-9.00
AISI T-42
1.25-1.40
0.00-0.40
0.00-0.40
-
-
3.75-4.50
2.75-3.50
2.75-3.25
8.50-9.50
9.00-10.00
0.00-0.40

 

 

APPLICATION
RECOMMENDED QUALITIES
Axles & Axle Components EN-24, EN-19
Arbors EN-24
Backing-out Tools AISI T1, AISI T4
Beading Tools HCHC AISI D3 / HCHC AISI D2
Bits-Router AISI T1 / AISI T4
Bits/Tool Holder AISI M2/AISI T1/AISI T4
Blacksmith’s Tools 1% CARBON TOOL STEEL
Boring Tools AISI T1, AISI T4, AISI M2
Brick Mould Liners HCHC AISI D3
Ball Races EN-31
Broaches AISI-T1
Bushes OHNS, HCHC
Calipers OHNS, 1% CARBON STEEL
Cams HCHC
Caulking Tools MY EXTRA
Chasers-Screw Thread AISI T1, AISI M2
Chisels-Pheumatic MY EXTRA
Chisels-Hot HOT DIE AISI H11
Coal Cutters MY EXTRA
Collets EN-47
Concrete Moulds HCHC AISI D3
Cores-Die Casting HOT DIE STEEL
Concrete Breakers MY EXTRA
Counter-Bores (Countersinks) AISI T1
Cropper Blades-Cold HCHC AISI D3
Cold Extrusion Dies HCHC AISI D3 / AISI D2
Cold Forming Rolls HCHC AISI D3
Cold Punches HCHC AISI D3 / HCHC AISI D2
Cutters AISI T1, AISI M2
Die Bases (Impact Extrusion) HCHC AISI D3, HCHC AISI D2
Dies-Blanking-Cold HCHC AISI D3, HCHC AISI D2
Ceramic Moulding HCHC AISI D3, HCHC AISI D2
Dies-Coining, Cold Extrusion HC HC AISI D3, HC HC AISI D2
Dies-Extrusion-Hot HOT DIE STEEL AISI H24/AISI H11
Diesel Oil injector Nozzles AISI T1
Drawing Plugs HC HC AISI D3
Drills AISI T1, AISI M2
Drills Plates OHNS
Engraving Tools AISI T1
Extrusion Liners EN24
File Catting Chisels AISI T1
Gauges OHNS, HCHC AISC D3
Gear Cutters AISI T1
Gripper Dies MY EXTRA, HCHC AISI D3
Guillotine Blades HCHC AISI D3
Hacksaw Slotting Cutters AISI T1
Knives-Guillotine HCHC AISI D3
Lathe Tools AISI T1, AISI T4
Lines-Extrusion EN-24
Layshafts EN-36
Magneto Drive Coupling, Shaft and Wheels EN-24, EN-36
Mandrels-Tube Drawing HC HC AISI D3
Milling Cutters AISI T1, AISI T4
Parting Tools AISI T1, AISI T4
Pins SILVER STEEL (SAE 52100)
Planer Tools AISI T1, AISI M2
Plug Gauges HCHC / OHNS
Pneumatic Tools MY EXTRA
Punches OHNS / HCHC
Pinion Shafts EN-24
Pinions EN-24
Reamers AISI T1
Ring Gauges OHNS
Rivet Snaps / Sets MY EXTRA
Rolls-Cold Forming HCHC AISI D3
Seaming Rolls HCHC AISI D3, HC HC AISI D2
Shear Blades HCHC AISI D3
Spinning Tools HCHC AISI D3, HC HC AISI D2
Taps AISI T1 AISI T4
Thread Milling Cutters AISI T1, AISI T4
Thread Gauges OHNS
Tool Bits AISI T1, AISI M2
Tube Drawing Plugs HCHC AISI D3
Weighing Machine Pivots OHNS

Technical Specifications

Technical Specifications 
Click on each grade to view its datasheet – Steel grade comparison
Non-alloy structural steels
S235JR
S235J2
S275JR
S275J0
S355J0
S355J2
E295
E335
Free-cutting steels
10SPb20
11SMn30
11SMnPb30
11SMn37
11SMnPb37
35SPb20
36SMn14
36SMnPb14
46S20
46SPb20
Case-hardening steels
C10E
C15E
C16E
XC18
16MnCr5
20MnCr5
17NiCrMo6-4
18NiCrMo5
20NiCrMo2-2
16NiCr4
16NiCr11
16NiCrMo12
Nitriding steels
34CrAlNi7-10
41CrAlMo7-10
ASTMA105
ASTMA350LF2
Steels for creep strength
40CrMoV4-6
10CrMo9-10
 
Carbon steels for quenching and tempering
C22E
C30E
C35E   
C38
C40E  
C45E
C50E
C55E
C60E
Quenched and tempered steels
41Cr4
34CrMo4
42CrMo4
39NiCrMo3
34CrNiMo6
40NiCrMo7
30NiCrMo12
36NiCrMo16
50CrMo4
Flame and induction hardening steels
C43
C48
Cf53
36CrMn4
41CrMo4
40NiCrMo3
50CrMo4
Spring steels
C60E
56Si7
60SiCr8
51CrV4
52SiCrNi5
 
Ball-bearing steels  
102Cr6
100CrMo7
X82WMoV-6-5
Alloyed hot work tool steels
X37CrMoV5-1
X40CrMoV5-1 
40NiCrMoV16KU
55NiCrMoV7
 
Steels for chrome-plating
C45E
Cf53
20MnVS6
42CrMo4
39NiCrMo3
50CrMo4
Alloyed cold work tool steels
35CrMo7
40CrMnMo7
100CrMo7
110W4KU
90MnCrV8
X38CrMo16
X153CrMoV12
X210Cr12
58SiMo8KU
60WCrV8
C45U
 
High-speed steels
HS6-5-2-5
HS2-9-1-8
HS6-5-2C
HS10-4-3-10
 
Stainless steels
AISI303
AISI304
AISI316
AISI416
AISI420
AISI430
AISI431
 
Unalloyed steels
SAE1141
SAE1116
SAE1117
SAE1018
SAE1045
CB4FF
CB20FF
C20


STEEL GRADES
CATEGORY AISI / SAE DIN B.S. JIS
PLAIN CARBON STEEL 1010 CK10 EN2A S10C
1015 CK15 EN32B S15C
1025 CK25 EN3B S25C
1035 CK35 EN8, EN8A S35C
1045 CK45 EN43B S45C
1055 CK55 EN9 S55C
1065 CK65 EN43D S58C
CARBON – Mn STEEL
SEMI FREE CUTTING STEEL
1541 28Mn6 EN15 SMn420H
- 40Mn4 - SMn433H
1137, 1141 - EN15AM SMn433H, SUM41
CHROME + MANGENSE STEEL 1541 16MnCr5 - SCR415, SUM420
- 20MnCr5 - -
CHROME + NICKEL STEEL 1320 15CrNiM06 EN352 -
LOW CARBON
CHROME + NICKEL MOLYSTEEL
- - - -
8620 - EN353, EN354 SNCM420H
4320 17CrNiM06 EN36C, EN -
- - 361, 362, 363 -
CHROME STEEL 5130 34Cr4 EN18A, EN18C SCR435
5140 41Cr4 SCR440
CHROME + MOLYSTEEL 4130 25CrM04 EN19C SCM440H
4135 34CrM04 - SCM435, SCM420
4140 42CrM04 - -
MEDIUM CARBON
CHROME + NICKEL + POLYSTEEL
4340 - EN24 SNCM431, SNCM439
SNCM447
BEARING STEEL SAE52100 100Cr6 EN31 SUJ1, SUJ2 etc
SAE5160 - EN45A SUP6, SUP9, SUP11


GRADES (As per Indian & Various International Standards)
  • CARBON AND ALLOYSTEELS (Automobile Sectors)
    1. Carbon Steel
      1. Forging
      2. Boilers
      3. Auto
        • 2 Wheelers
        • Cars
        • Tractors
      4. Seamless Tube
      5. Exports
        • Transmission
    2. Low Alloys
      1. Forging
      2. Auto
        • 2 Wheelers
        • 4 Wheelers
      3. Seamless Tube
    3. High Alloys
      1. Forging
      2. Auto
        • Heavy Engineering
  • SPRING STEELS
  • BALL BEARING STEELS
  • ANY OTHER SPECIAL GRADES OF STEEL AS PER CUSTOMER’S REQUIREMENTS
  • PRIMARY ALUMINIUM SMELTERS CATHODE/ANODE STEEL BARS.
SIZE RANGE
AS CAST PRODUCTS

  • BILLETS :
125 X 125 mm, 160 X 160 mm & 200 X 200 mm Squares
  • BLOOMS :
240 X 280 mm Rectangles
  • ROUNDS :
160, 200, 220 mm Dia Rounds

AS ROLLED PRODUCTS

  • ROUNDS :
30,32,34,36,38,40,42,45,48,50,53,55,56, 58, 60,63,65,68,70,75,80,83,85,90,95,97.5,100, 105,110,115,117.5,120,125,130,135 mm
  • RCS :
50,55,60,63,65,70,75,85,90,95,100,103,105, 110,118,125,130,136,140,147,150,160,180 mm
  • RECTANGLES :
180×180, 160×70, 160×140, 150×100, 150×90, 140×100 mm
  • ANY OTHER SIZE MUTUALLY AGREED.

General Purpose Steels

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

IS 226

M.S.

Min

0.15

0.15

0.30

Max

0.25

0.35

0.65

0.055

0.055

-

-

-

-

SAE

SAE 1010

Min

0.08

0.15

0.30

Max

0.13

0.35

0.60

0.040

0.050

-

-

-

-

SAE

SAE 1015

Min

0.13

0.15

0.30

Max

0.18

0.35

0.60

0.040

0.050

-

-

-

-

SAE

SAE 1018

Min

0.15

0.15

0.60

Max

0.20

0.35

0.90

0.040

0.050

-

-

-

-

SAE

SAE 1020

Min

0.18

0.15

0.30

Max

0.23

0.35

0.60

0.040

0.050

-

-

-

-

Flanging Quality Steels

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

IS 1762

Class 1

Min

0.10

0.15

0.60

Max

0.20

0.35

0.90

0.050

0.050

-

-

-

-

IS 1762

Class II

Min

0.15

0.15

0.60

Max

0.25

0.35

0.90

0.050

0.050

-

-

-

-

ASTM

A 105

Min

0.18

0.15

0.80

Max

0.23

0.35

1.05

0.035

0.035

0.30

-

-

-

ASTM

A 350 LF2

Min

Max

0.30

0.50

1.50

0.035

0.045

-

-

-

High Tensile Steels

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

IS 1570

20Mn2 (HMMS)

Min

0.17

0.15

1.10

Max

0.22

0.30

1.30

0.050

0.050

-

-

-

-

SAE

SAE 1541

Min

0.36

0.15

1.35

Max

0.44

0.35

1.65

0.040

0.050

-

-

-

-

Through Hardening Steels

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

BS 970

En 8

Min

0.35

0.15

0.60

Max

0.45

0.35

1.00

0.050

0.050

-

-

-

-

BS 970

En 8D

Min

0.40

0.15

0.70

Max

0.45

0.35

0.90

0.050

0.050

-

-

-

-

BS 970

En 9

Min

0.50

0.15

0.50

Max

0.60

0.35

0.80

0.050

0.050

-

-

-

-

IS 2073

C 45

Min

0.42

0.15

0.60

Max

0.50

0.35

0.90

0.045

0.045

-

-

-

-

IS 3930

45 C 8

Min

0.42

0.15

0.50

Max

0.50

0.35

0.80

0.035

0.035

-

-

-

-

SAE

SAE 1045

Min

0.43

0.15

0.60

Max

0.50

0.35

0.90

0.040

0.050

-

-

-

-

DIN 17200

C 60

Min

0.57

0.15

0.60

Max

0.65

0.35

0.90

0.045

0.045

-

-

-

-

DIN 17200

C 70

Min

0.65

0.50

Max

0.70

0.60

0.80

0.055

0.055

-

-

-

-

JIS G 4051

S 55 C

Min

0.52

0.15

0.60

Max

0.58

0.35

0.90

0.030

0.035

-

-

-

-

Case Hardening Steels

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

DIN 17210

16 Mn Cr 5

Min

0.14

0.15

1.00

 

0.80

Max

0.19

0.35

1.30

0.035

0.035

1.10

-

-

-

DIN 17210

20 Mn Cr 5

Min

0.17

0.15

1.10

   

1.00

Max

0.22

0.35

1.40

0.035

0.035

1.30

-

-

-

Carbon Chrome Steels for Through Hardening

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

DIN 17210

34Cr4

Min

0.30

0.15

0.60

 

0.90

Max

0.37

0.35

0.90

0.035

0.035

1.20

-

-

-

DIN 17210

41Cr4

Min

0.38

0.15

0.50

   

0.90

Max

0.45

0.35

0.80

0.035

0.035

1.20

-

-

-

BS 970

En 18

Min

0.35

0.15

0.60

0.85

Max

0.45

0.35

0.95

0.050

0.050

1.15

-

-

-

SAE

SAE 5140

Min

0.38

0.15

0.70

0.70

Max

0.43

0.35

0.90

0.035

0.040

0.90

-

-

-

Chrome Moly Steels for Through Hardening

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

SAE

SAE 4130

Min

0.28

0.15

0.40

 

0.80

0.15

Max

0.33

0.30

0.60

0.035

0.040

1.10

0.25

-

-

SAE

SAE 4140

Min

0.38

0.15

0.75

   

0.80

0.15

Max

0.43

0.30

1.00

0.035

0.040

1.10

0.25

-

-

SAE

SAE 4137

Min

0.35

0.15

0.70

0.80

0.15

Max

0.40

0.30

0.90

0.035

0.040

1.10

0.25

-

-

SAE

SAE 4137 H

Min

0.34

0.15

0.60

0.75

0.15

Max

0.41

0.30

1.00

0.035

0.035

1.20

0.25

-

-

DIN 17200

42CrMo4

Min

0.38

0.15

0.50

0.90

0.15

Max

0.45

0.40

0.80

0.035

0.035

1.20

0.30

-

-

JIS G 4105

SCM 420

Min

0.18

0.15

0.60

0.90

0.15

Max

0.23

0.35

0.85

0.030

0.030

1.20

0.30

-

-

JIS G 4105

SCM 435

Min

0.33

0.15

0.60

0.90

0.15

Max

0.38

0.35

0.85

0.30

0.030

1.20

0.30

-

-

BS 970

En 19

Min

0.35

0.15

0.50

0.90

0.20

Max

0.45

0.35

0.80

0.050

0.050

1.50

0.40

-

-

BS 970

En 19C

Min

0.40

0.15

0.50

0.90

0.20

Max

0.45

0.35

0.80

0.050

0.050

1.20

0.35

-

-

ASTM

B 16

Min

0.36

0.15

0.45

0.80

0.50

Max

0.47

0.35

0.70

0.035

0.040

1.15

0.65

-

-

Cr-Ni-Mo Steel for Through Hardening

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

BS 970

En 24

Min

0.35

0.15

0.45

 

0.90

0.20

1.30

Max

0.45

0.35

0.70

0.050

0.050

1.40

0.35

1.80

-

SAE

SAE 4320

Min

0.17

0.15

0.45

   

0.40

0.20

1.65

Max

0.22

0.30

0.65

0.035

0.040

0.60

0.30

2.00

-

SAE

SAE 4340

Min

0.38

0.15

0.60

0.70

0.20

1.65

Max

0.43

0.30

0.80

0.035

0.040

0.90

0.30

2.00

-

Cr-Ni-Mo Case Hardening Steel

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

BS 970

En 36C

Min

0.12

0.10

0.30

 

0.60

0.10

3.00

Max

0.18

0.35

0.60

0.050

0.050

1.10

0.25

3.75

-

BS 970

En 38

Min

0.15

   

0.15

4.50

Max

0.16

0.35

0.60

0.050

0.050

0.30

0.30

5.50

-

Cr-Ni-Mo Steels

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

BS 970

En 353

Min

0.15

0.50

 

0.75

0.08

1.00

Max

0.20

0.35

1.00

0.050

0.050

1.25

0.15

1.50

-

BS 970

En 354

Min

0.15

0.50

   

0.75

0.10

1.50

Max

0.20

0.35

1.00

0.050

0.050

1.25

0.20

2.00

-

BS 970

En 355

Min

0.15

0.40

1.40

0.15

1.80

Max

0.20

0.35

0.70

0.050

0.050

1.70

0.25

2.20

-

SAE

SAE 8620

Min

0.18

0.15

0.70

0.40

0.15

0.40

Max

0.23

0.30

0.90

0.035

0.040

0.60

0.25

0.70

-

SAE

SAE 8627

Min

0.25

0.15

0.70

0.40

0.15

0.40

Max

0.30

0.30

0.90

0.040

0.035

0.60

0.25

0.70

-

Steel for Pump Shafts

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

SAE

AISI 410

Min

 

11.5

Max

0.15

1.00

1.00

0.040

0.030

13.0

-

-

-

SAE

AISI 420

Min

0.15

   

12.0

Max

0.25

1.00

1.00

0.030

0.030

14.0

-

-

-

Ball Bearing Steel

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

BS 970

SAE 52100

Min

0.98

0.15

0.25

 

1.30

Max

1.10

0.30

0.45

0.025

0.025

1.60

-

-

-

Creep Resistant Steel

Reference

Grade

%

C

Si

Mn

P

S

Cr

Mo

Ni

Cu

ASTM A 182

F 5

Min

0.30

 

4.00

0.44

Max

0.15

0.50

0.60

0.030

0.030

6.00

0.65

0.50

-

ASTM A 182

F 9

Min

0.50

0.30

   

8.00

0.90

Max

0.15

1.00

0.60

0.030

0.030

10.00

1.10

-

-

ASTM A 182

F 11

Min

0.10

0.50

0.30

1.00

0.44

Max

0.20

1.00

0.80

0.040

0.040

1.50

0.65

-

-

ASTM A 182

F 22

Min

0.30

2.00

0.87

Max

0.15

0.50

0.60

0.040

0.040

2.50

1.13

-

-

AISI
SAE
UNS C Mn P S
1005 G10050 0.06 0.35 0.040 0.050
1006 G10060 0.08 0.25-0.40 0.040 0.050
1008 G10080 0.10 0.30-0.60 0.040 0.050
1010 G10100 0.08-0.13 0.30-0.60 0.040 0.050
1012 G10120 0.10-0.15 0.30-0.60 0.040 0.050
1015 G10150 0.13-0.18 0.30-0.60 0.040 0.050
1016 G10160 0.13-0.18 0.60-0.90 0.040 0.050
1017 G10170 0.15-0.20 0.60-0.90 0.040 0.050
1018 G10180 0.15-0.20 0.60-0.90 0.040 0.050
1019 G10190 0.15-0.20 0.70-1.00 0.040 0.050
1020 G10200 0.18-0.23 0.30-0.60 0.040 0.050
1021 G10210 0.18-0.23 0.60-0.90 0.040 0.050
1022 G10220 0.18-0.23 0.70-1.00 0.040 0.050
1023 G10230 0.20-0.25 0.30-0.60 0.040 0.050
1025 G10250 0.22-0.28 0.30-0.60 0.040 0.050
1026 G10260 0.22-0.28 0.60-0.90 0.040 0.050
1029 G10290 0.25-0.31 0.60-0.90 0.040 0.050
1030 G10300 0.28-0.34 0.60-0.90 0.040 0.050
1035 G10350 0.32-0.38 0.60-0.90 0.040 0.050
1037 G10370 0.32-0.38 0.70-1.00 0.040 0.050
1038 G10380 0.35-0.42 0.60-0.90 0.040 0.050
1039 G10390 0.37-0.44 0.70-1.00 0.040 0.050
1040 G10400 0.37-0.44 0.60-0.90 0.040 0.050
1042 G10420 0.40-0.47 0.60-0.90 0.040 0.050
1043 G10430 0.40-0.47 0.70-1.00 0.040 0.050
1044 G10440 0.43-0.50 0.30-0.60 0.040 0.050
1045 G10450 0.43-0.50 0.60-0.90 0.040 0.050
1046 G10460 0.43-0.50 0.70-1.00 0.040 0.050
1049 G10490 0.46-0.53 0.60-0.90 0.040 0.050
1050 G10500 0.48-0.55 0.60-0.90 0.040 0.050
1053 G10530 0.48-0.55 0.70-1.00 0.040 0.050
1055 G10550 0.50-0.60 0.60-0.90 0.040 0.050
1059 G10590 0.55-0.65 0.50-0.80 0.040 0.050
1060 G10600 0.55-0.65 0.60-0.90 0.040 0.050
1064 G10640 0.60-0.70 0.50-0.80 0.040 0.050
1065 G10650 0.60-0.70 0.40-0.70 0.040 0.050
1069 G10690 0.65-0.75 0.40-0.70 0.040 0.050
1070 G10700 0.65-0.75 0.60-0.90 0.040 0.050
1078 G10780 0.72-0.85 0.30-0.60 0.040 0.050
1080 G10800 0.75-0.88 0.60-0.90 0.040 0.050
1084 G10840 0.80-0.93 0.60-0.90 0.040 0.050
1086 G10860 0.80-0.93 0.30-0.50 0.040 0.050
1090 G10900 0.85-0.98 0.60-0.90 0.040 0.050
1095 G10950 0.90-1.03 0.30-0.50 0.040 0.050
AISI
SAE
UNS C Mn P S
1110 G11100 0.08-0.13 0.30-0.60 0.040 0.08-0.13
1117 G11170 0.14-0.20 1.00-1.30 0.040 0.08-0.13
1118 G11180 0.14-0.20 1.30-1.60 0.040 0.08-0.13
1137 G11370 0.32-0.39 1.35-1.65 0.040 0.08-0.13
1139 G11390 0.35-0.39 1.35-1.65 0.040 0.13-0.20
1140 G11400 0.37-0.44 0.70-1.00 0.040 0.08-0.13
1141 G11410 0.37-0.45 1.35-1.65 0.040 0.08-0.13
1144 G11440 0.40-0.48 1.35-1.65 0.040 0.24-0.33
1146 G11460 0.42-0.49 0.70-1.00 0.040 0.08-0.13
1151 G11510 0.48-0.55 0.70-1.00 0.040 0.08-0.13
AISI
SAE
UNS C Mn P S
1211 G12110 max 0.13 0.60-0.90 0.07-0.12 0.10-0.15
1212 G12120 max 0.13 0.70-1.00 0.07-0.12 0.16-0.23
1213 G12130 max 0.13 0.70-1.00 0.07-0.12 0.24-0.33
1214 G12144 max 0.15 0.85-1.15 0.04-0.09 0.26-0.35
1215 G12150 max 0.09 0.75-1.05 0.04-0.09 0.26-0.35
AISI
SAE
UNS C Mn P S
1513 G15130 0.10-0.16 1.10-1.40 0.040 0.050
1522 G15220 0.18-0.24 1.10-1.40 0.040 0.050
1524 G15240 0.19-0.25 1.35-1.65 0.040 0.050
1526 G15260 0.22-0.29 1.10-1.40 0.040 0.050
1527 G15270 0.22-0.29 1.20-1.50 0.040 0.050
1541 G15410 0.36-0.44 1.35-1.65 0.040 0.050
1548 G15480 0.44-0.52 1.10-1.40 0.040 0.050
1551 G15510 0.45-0.56 0.85-1.15 0.040 0.050
1552 G15520 0.47-0.55 1.20-1.50 0.040 0.050
1561 G15610 0.55-0.65 0.75-1.05 0.040 0.050
1566 G15660 0.60-0.71 0.85-1.15 0.040 0.050

AISI & SAE No
UNS No
AISI 1108
UNS G11080
AISI 1109
UNS G11090
AISI 1110
UNS G11100
AISI 1116
UNS G11160
AISI 1117
UNS G11170
AISI 1118
UNS G11180
AISI 1119
UNS G11190
AISI 1123
UNS G11230
AISI 1132
UNS G11320
AISI 1137
UNS G11370
AISI 1139
UNS G11390
AISI 1140
UNS G11400
AISI 1141
UNS G11410
AISI 1144
UNS G11440
AISI 1145
UNS G11450
AISI 1146
UNS G11460
AISI 1151
UNS G11510
AISI 1211
UNS G12110
AISI 1212
UNS G12120
AISI 1213
UNS G12130
AISI 1215
UNS G12150
AISI 1330
UNS G13300
AISI 1330 H
UNS H13300
AISI 1335
UNS G13350
AISI 1335 H
UNS H13350
AISI 1340
UNS G13400
AISI 1340 H
UNS H13400
AISI 1345
UNS G13450
AISI 1345 H
UNS H13450
AISI 1513
UNS G15130
AISI 1518
UNS G15180
AISI 1522
UNS G15220
AISI 1522 H
UNS H15220
AISI 1524
UNS G15240
AISI 1524 H
UNS H15240
AISI 1525
UNS G15250
AISI 1526
UNS G15260
AISI 1526 H
UNS H15260
AISI 1527
UNS G15270
AISI 1533
UNS G15330
AISI 1534
UNS G15340
AISI 1536
UNS G15360
AISI 1541
UNS G15410
AISI 1541 H
UNS H15410
AISI 1547
UNS G15470
AISI 1548
UNS G15480
AISI 1551
UNS G15510
AISI 1552
UNS G15520
AISI 1553
UNS G15530
AISI 1561
UNS G15610
AISI & SAE No
UNS No
AISI 1566
UNS G15660
AISI 1570
UNS G15700
AISI 1572
UNS G15720
AISI 1580
UNS G15800
AISI 1590
UNS G15900
AISI 3140
UNS G31400
AISI 4012
UNS G40120
AISI 4023
UNS G40230
AISI 4024
UNS G40240
AISI 4027
UNS G40270
AISI 4027 H
UNS H40270
AISI 4028
UNS G40280
AISI 4028 H
UNS H40280
AISI 4032
UNS G40320
AISI 4032 H
UNS H40320
AISI 4037
UNS G40370
AISI 4037 H
UNS H40370
AISI 4042
UNS G40420
AISI 4042 H
UNS H40420
AISI 4047
UNS G40470
AISI 4047 H
UNS H40470
AISI 4063
UNS G40630
AISI 4118
UNS G41180
AISI 4118 H
UNS H41180
AISI 4120
UNS G41200
AISI 4121
UNS G41210
AISI 4130
UNS G41300
V4130 H
UNS H41300
AISI 4135
UNS G41350
AISI 4135 H
UNS H41350
AISI 4137
UNS G41370
AISI 4137 H
UNS H41370
AISI 4140
UNS G41400
AISI 4140 H
UNS H41400
AISI 4142
UNS G41420
AISI 4142 H
UNS H41420
AISI 4145
UNS G41450
AISI 4145 H
UNS H41450
AISI 4147
UNS G41470
AISI 4147 H
UNS H41470
AISI 4150
UNS G41500
AISI 4150 H
UNS H41500
AISI 4161
UNS G41610
AISI 4161 H
UNS H41610
AISI 4320
UNS G43200
AISI 4320 H
UNS H43200
AISI 4337
UNS G43370
AISI 4340
UNS G43400
AISI 4340 H
UNS H43400
AISI & SAE No
UNS No
AISI 4419
UNS G44190
AISI 4419 H
UNS H44190
AISI 4422
UNS G44220
AISI 4427
UNS G44270
AISI 4520
UNS G45200
AISI 4615
UNS G46150
AISI 4617
UNS G46170
AISI 4620
UNS G46200
AISI 4620 H
UNS H46200
AISI 4621
UNS G46210
AISI 4621 H
UNS H46210
AISI 4626
UNS G46260
AISI 4626 H
UNS H46260
AISI 4715
UNS G47150
AISI 4718
UNS G48180
AISI 4718 H
UNS H48180
AISI 4720
UNS G47200
AISI 4720 H
UNS H47200
AISI 4815
UNS G48150
AISI 4815 H
UNS H48150
AISI 4817
UNS G48170
AISI 4817 H
UNS H48170
AISI 4820
UNS G48200
AISI 4820 H
UNS H48200
AISI 5015
UNS G50150
AISI 5046
UNS G50460
AISI 5046 H
UNS H50460
AISI 5060
UNS G50600
AISI 5115
UNS G51150
AISI 5117
UNS G51170
AISI 5120
UNS G51200
AISI 5120 H
UNS H51200
AISI 5130
UNS G51300
AISI 5130 H
UNS H51300
AISI 5132
UNS G51320
AISI 5132 H
UNS H51320
AISI 5135
UNS G51350
AISI 5135 H
UNS H51350
AISI 5140
UNS G51400
AISI 5140 H
UNS H51400
AISI 5145
UNS G51450
AISI 5145 H
UNS H51450
AISI 5147
UNS G51470
AISI 5147 H
UNS H51470
AISI 5150
UNS G51500
AISI 5150 H
UNS H51500
AISI 5155
UNS G51550
AISI 5155 H
UNS H51550
AISI 5160
UNS G51600
AISI 5160 H
UNS H51600


Cold Work Tool Steels

COLD WORK TOOL STEEL

DIN 1.2080, X210Cr12, ASTM / SAE / AISI D3, JIS SKD1
DIN 1.2210, 115CrV3, ASTM / SAE / AISI L2, JIS SKS43
DIN 1.2363, X100CrMoV5, ASTM / SAE / AISI A2 JIS SKD12
DIN 1.2379, X153CrMoV12, ASTM / SAE / AISI D2, JIS SKD10
DIN 1.2436, X210CrW12, ASTM / SAE / AISI D6, JIS SKD2
DIN 1.2510, 100MnCrW4, ASTM / SAE / AISI O1, JIS SKS3
DIN 1.2550, 60WCrV8, ASTM / SAE / AISI S1
DIN 1.2601, X165CrMoV12
DIN 1.2767, 45NiCrMo16, JIS SKT6
DIN 1.2842, 90MnCrV8, ASTM / SAE / AISI O2

AISI-W1 WATER HARDENING TOOL STEEL

 

AISI W1
Category Steel
Class Tool steel
Type Water-hardening tool steel
Designations United States: ASTM A686 , SAE J437 (W108) , SAE J437 (W109) , SAE J437 (W112) , SAE J437 (WhO) , SAE J438 (W108) , SAE J438 (W109) , SAE J438 (W110) , SAE J438 (W112) , UNS T72301



AISI-O1 OIL HARDENING TOOL STEEL – OHNS -  90MnWCrV5

 

AISI O1
Category Steel
Class Tool steel
Type Oil-hardening cold work steel
Designations Germany: DIN 1.2510
United Kingdom: B.S. BO 1
United States: ASTM A681 , FED QQ-T-570 , SAE J437 , SAE J438 , UNS T31501

 

AISI-O2 OIL HARDENING TOOL STEEL – OHNS – 90MnCrV8

 

AISI O2
Category Steel
Class Tool steel
Type Oil-hardening cold work steel
Designations France: AFNOR 90 MV 8
Germany: DIN 1.2842
Italy: UNI 88 Mn V 8 KU
United Kingdom: B.S. Bo 2
United States: ASTM A681 , FED QQ-T-570 , SAE J437 , SAE J438 , UNS T31502

 

AISI-O6 OIL HARDENING TOOL STEEL – OHNS

 

AISI O6
Category Steel
Class Tool steel
Type Oil-hardening cold work steel
Designations United States: ASTM A681 , FED QQ-T-570 , SAE J437 , SAE J438 , UNS T31506



AISI-O7 OIL HARDENING TOOL STEEL – OHNS

AISI O7
Category Steel
Class Tool steel
Type Oil-hardening cold work steel
Designations United States: ASTM A681 , FED QQ-T-570 , UNS T31507




Cold Work Tool Steel
Equivalent Grades
American
German
Japanese
China
Poland
(W.Nr.)
(DIN)
AISI D2
1.2379
X155CrVMo12-1
SKD11
Cr12MoV
-
AISI D3
1.2080
X210Cr12
SKD1
Cr12
NCll
AISI O1
1.2510
100MnCrW4
-
9CrWMn
-
AISI O7
-
-
-
-
-
AISI A8
-
-
-
-
-
AISI S1
1.2542
45WCrV7
-
-
NZ2
Die Blocks L6
1.2714
35CrMo8
-
-
WNLV
SAE52100
-
-
-
-
-
K310
1.2327
-
-
-
-



Chemical Composition
C
Si
Mn
P
S
Cr
Mo
V
W
Ni
AISI D2
1.50-1.60
0.10-0.40
0.15-0.45
0.00-0.030
0.00-0.030
11.00-12.00
0.60-0.80
0.90-1.10
-
AISI D3
1.90-2.20
0.10-0.40
0.15-0.45
0.00-0.030
0.00-0.030
11.00-12.00
-
-
-
AISI O1
0.85-0.95
0.20-0.40
1.00-1.30
-
-
0.40-0.60
-
0.20-0.20
0.40-0.60
AISI O7
1.10-1.30
0.60-0.60
1.00-1.00
-
-
0.35-0.85
0.30-0.30
0.40-0.40
1.00-2.00
AISI A8
0.50-0.60
0.75-1.10
0.50-0.50
-
-
4.75-5.50
1.15-1.65
-
1.00-1.50
AISI S1
0.45-0.55
0.25-0.45
0.20-0.40
-
-
1.25-1.75
0.40-0.40
0.15-0.30
1.00-3.00
Die Blocks
L6
0.50-0.60
0.10-0.40
0.65-0.95
0.00-0.030
0.00-0.030
1.00-1.2
0.45-0.55
0.07-0.12
-
1.50
-1.80
SAE-52100
0.95-1.10
0.20-0.80
0.25-0.55
0.00-0.025
0.00-0.025
1.30-1.60
-
-
-
K310
0.83-0.90
0.15-0.35
0.30-0.45
0.00-0.030
0.00-0.030
1.60-1.90
0.20-0.35
0.05-0.15
-

 

 

Cold Work Tool Steel
Equivalent Grades
American
German
Japanese
China
Poland
(W.Nr.)
(DIN)
AISI D-2
DIN 1.2379
X155CrVMo12-1
SKD-11
Cr12MoV
-
AISI D-3
DIN 1.2080
X210Cr12
SKD-1
Cr12
NCll
AISI O-1
DIN 1.2510
100MnCrW4
-
9CrWMn
-
AISI O-7
-
-
-
-
-
AISI A-8
-
-
-
-
-
AISI S-1
DIN 1.2542
45WCrV7
-
-
NZ2
Die Blocks L-6
DIN 1.2714
35CrMo8
-
-
WNLV
SAE-52100
-
-
-
-
-
K310
DIN 1.2327
-
-
-
-



Chemical Composition
C
Si
Mn
P
S
Cr
Mo
V
W
Ni
AISI D-2
1.50-1.60
0.10-0.40
0.15-0.45
0.00-0.030
0.00-0.030
11.00-12.00
0.60-0.80
0.90-1.10
-
AISI D-3
1.90-2.20
0.10-0.40
0.15-0.45
0.00-0.030
0.00-0.030
11.00-12.00
-
-
-
AISI O-1
0.85-0.95
0.20-0.40
1.00-1.30
-
-
0.40-0.60
-
0.20-0.20
0.40-0.60
AISI O-7
1.10-1.30
0.60-0.60
1.00-1.00
-
-
0.35-0.85
0.30-0.30
0.40-0.40
1.00-2.00
AISI A-8
0.50-0.60
0.75-1.10
0.50-0.50
-
-
4.75-5.50
1.15-1.65
-
1.00-1.50
AISI S-1
0.45-0.55
0.25-0.45
0.20-0.40
-
-
1.25-1.75
0.40-0.40
0.15-0.30
1.00-3.00
Die Blocks
L-6
0.50-0.60
0.10-0.40
0.65-0.95
0.00-0.030
0.00-0.030
1.00-1.2
0.45-0.55
0.07-0.12
-
1.50
-1.80
SAE-52100
0.95-1.10
0.20-0.80
0.25-0.55
0.00-0.025
0.00-0.025
1.30-1.60
-
-
-
K310
0.83-0.90
0.15-0.35
0.30-0.45
0.00-0.030
0.00-0.030
1.60-1.90
0.20-0.35
0.05-0.15
-

 

 

APPLICATION
RECOMMENDED QUALITIES
Axles & Axle Components EN-24, EN-19
Arbors EN-24
Backing-out Tools AISI T1, AISI T4
Beading Tools HCHC AISI D3 / HCHC AISI D2
Bits-Router AISI T1 / AISI T4
Bits/Tool Holder AISI M2/AISI T1/AISI T4
Blacksmith’s Tools 1% CARBON TOOL STEEL
Boring Tools AISI T1, AISI T4, AISI M2
Brick Mould Liners HC HC AISI D3
Ball Races EN-31
Broaches AISI-T1
Bushes OHNS, HC HC
Calipers OHNS, 1% CARBON STEEL
Cams HC HC
Caulking Tools MY EXTRA
Chasers-Screw Thread AISI T1, AISI M2
Chisels-Pheumatic MY EXTRA
Chisels-Hot HOT DIE AISI H11
Coal Cutters MY EXTRA
Collets EN-47
Concrete Moulds HC HC AISI D3
Cores-Die Casting HOT DIE STEEL
Concrete Breakers MY EXTRA
Counter-Bores (Countersinks) AISI T1
Cropper Blades-Cold HC HC AISI D3
Cold Extrusion Dies HC HC AISI D3 / AISI D2
Cold Forming Rolls HC HC AISI D3
Cold Punches HC HC AISI D3 / HC HC AISI D2
Cutters AISI T1, AISI M2
Die Bases (Impact Extrusion) HC HC AISI D3, HC HC AISI D2
Dies-Blanking-Cold HC HC AISI D3, HC HC AISI D2
Ceramic Moulding HC HC AISI D3, HC HC AISI D2
Dies-Coining, Cold Extrusion HC HC AISI D3, HC HC AISI D2
Dies-Extrusion-Hot HOT DIE STEEL AISI H24/AISI H11
Diesel Oil injector Nozzles AISI T1
Drawing Plugs HC HC AISI D3
Drills AISI T1, AISI M2
Drills Plates OHNS
Engraving Tools AISI T1
Extrusion Liners EN24
File Catting Chisels AISI T1
Gauges OHNS, HC HC AISC D3
Gear Cutters AISI T1
Gripper Dies MY EXTRA, HC HC AISI D3
Guillotine Blades HC HC AISI D3
Hacksaw Slotting Cutters AISI T1
Knives-Guillotine HC HC AISI D3
Lathe Tools AISI T1, AISI T4
Lines-Extrusion EN-24
Layshafts EN-36
Magneto Drive Coupling, Shaft and Wheels EN-24, EN-36
Mandrels-Tube Drawing HC HC AISI D3
Milling Cutters AISI T1, AISI T4
Parting Tools AISI T1, AISI T4
Pins SILVER STEEL (SAE 52100)
Planer Tools AISI T1, AISI M2
Plug Gauges HC HC / OHNS
Pneumatic Tools MY EXTRA
Punches OHNS / HC HC
Pinion Shafts EN-24
Pinions EN-24
Reamers AISI T1
Ring Gauges OHNS
Rivet Snaps / Sets MY EXTRA
Rolls-Cold Forming HC HC AISI D3
Seaming Rolls HC HC AISI D3, HC HC AISI D2
Shear Blades HC HC AISI D3
Spinning Tools HC HC AISI D3, HC HC AISI D2
Taps AISI T1 AISI T4
Thread Milling Cutters AISI T1, AISI T4
Thread Gauges OHNS
Tool Bits AISI T1, AISI M2
Tube Drawing Plugs HCHC AISI D3
Weighing Machine Pivots OHNS


Mechanical Properties

MECHANICAL PROPERTIES

Notation

A = % elongation at fracture
R eH = ReH Minimum Yield strength ( MPa )
R p0,2 = 0,2 % proof strength ( MPa )
Rm = Tensile strength ( MPa )
HV = Hardness value (Vickers)
t = Product thickness for specified properties ( mm)
+N = normalised
+NT = normalised and tempered
+QT = quenched and tempered
C = Cold rolled.
H = Hot rolled strip
P = Hot rolled plate
FN = (Deoxidation method) Rimming steels not permitted
FF = (Deoxidation method)Fully killed steel



BS EN 10025-2 Hot rolled products of non-alloy structural steels
Technical delivery conditions for non-alloy structural steels

Product Chemical composition

Name Number Deoxidation Method C % For thickness range Si max Mn max P max S max N max Cu max Other
=< 16 > 16
=<40
>40 % % % % % % %
S235JR 1.0038 FN 0,19 0,19 0,23 - 1,5 0,045 0,045 0,014 0,60 -
S235JO 1.0114 FN 0,19 0,19 0,19 - 1,5 0,040 0,040 0,014 0,60 -
S235J2 1.0117 FF 0,19 0,19 0,19 - 1,5 0,035 0,035 - 0,60 -
S275JR 1.0044 FN 0,24 0,24 0,25 - 1,6 0,045 0,045 0,014 0,60 -
S275JO 1.0143 FN 0,21 0,21 0,21 - 1,6 0,040 0,040 0,014 0,60 -
S275J2 1.0145 FF 0,21 0,21 0,21 - 1,6 0,035 0,035 - 0,60 -
S355JR 1.0045 FN 0,27 0,27 0,27 0,60 1,7 0,045 0,045 0,014 0,60 -
S355J0 1.0553 FN 0,23 0,23 0,24 0,60 1,7 0,040 0,040 0,014 0,60 -
S355J2 1.0577 FF 0,23 0,23 0,24 0,60 1,7 0,035 0,035 - 0,60 -
S355K2 1.0596 FF 0,23 0,23 0,24 0,60 1,7 0,035 0,035 - 0,60 -
S450J0 1.0590 FF 0,23 0,23 0,24 0,60 1,8 0,04 0,04 0,027 0,60 -

Basic mechanical properties at room temperature

Name Number ReH Minimum Yield strength (MPa )
for nominal thickness(mm)
R m (MPa)
for nominal thickness (mm)
<16 =>16 >40 >63 >80 >100 >150 >200 >250 <3 =>3 >100 >150 >250
=< 40 =< 63 =< 80 =< 100 =< 150 =< 200 =< 250 =< 400 =< 100 =< 150 <= 250 =< 400
S235JR 1.0038 235 225 215 215 215 195 185 175 - 360-510 360-510 350-500 340-490
S235JO 1.0114 235 225 215 215 215 195 185 175 - 360-510 360-510 350-500 340-490
S235J2 1.0117 235 225 215 215 215 195 185 175 165 360-510 360-510 350-500 340-490 330-480
S275JR 1.0044 275 265 255 245 235 225 215 205 430-580 410-560 400-540 380-540
S275JO 1.0143 275 265 255 245 235 225 215 205 - 430-580 410-560 400-540 380-540
S275J2 1.0145 275 265 255 245 235 225 215 205 195 430-580 410-560 400-540 380-540 380-540
S355JR 1.0045 355 345 335 325 315 295 285 275 - 510-680 470-630 450-600 450-600
S355J0 1.0553 355 345 335 325 315 295 285 275 - 510-680 470-630 450-600 450-600
S355J2 1.0577 355 345 335 325 315 295 285 275 265 510-680 470-630 450-600 450-600 450-600
S355K2 1.0596 355 345 335 325 315 295 285 275 265 510-680 470-630 450-600 450-600 450-600
S450J0 1.0590 450 430 410 390 380 380 - - - - 550-720 530-700 - -




BS EN 10025-3 :Hot rolled products of non-alloy structural steels
Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

Product Chemical composition

Name Number C max Si max Mn max P max S max Nb max V max Al tot Ti max Cr max Ni max Mo max Cu max vN max
% % % % % % % % % % % % % %
S275N 1.0490 0,20 0,45 0,45-1,60 0,035 0,030 0,060 0,070 0,015 0,060 0,35 0,35 0,13 0,60 0,017
S275NL 1.0491 0,18 0,45 0,45-1,60 0,030 0,025 0,060 0,070 0,015 0,060 0,35 0,35 0,13 0,60 0,017
S355N 1.0545 0,22 0,55 0,85-1,75 0,035 0,030 0,060 0,14 0,015 0,060 0,35 0,55 0,13 0,60 0,017
S355NL 1.0546 0,20 0,55 0,85-1,80 0,030 0,025 0,060 0,14 0,015 0,060 0,35 0,55 0,13 0,60 0,017
S420N 1.8902 0,22 0,65 0,95-1,80 0,035 0,030 0,060 0,22 0,015 0,060 0,35 0,85 0,13 0,60 0,027
S420NL 1.8912 0,22 0,65 0,95-1,80 0,030 0,025 0,060 0,22 0,015 0,060 0,35 0,85 0,13 0,60 0,027
S460N 1.8901 0,22 0,65 0,95-1,80 0,035 0,030 0,060 0,22 0,015 0,060 0,35 0,85 0,13 0,60 0,027
S460NL 1.8903 0,22 0,65 0,95-1,80 0,030 0,025 0,060 0,22 0,015 0,060 0,35 0,85 0,13 0,60 0,027

Basic mechanical properties at room temperature

Name Number R eH Minimum Yield strength (MPa)
for nominal thickness(mm)
R m (MPa)
for nominal thickness (mm)
A -
Elongation(min)
<16 >16 >40 >63 >80 >100 >150 >200 <100 >100 >200
=< 40 =< 63 =< 80 =< 100 =< 150 =< 200 =< 250 =< 200 =< 250 %
S275N 1.0490 275 265 255 245 235 225 215 205 370-510 350-480 350-480 23-24
S275NL 1.0491 275 265 255 245 235 225 215 205 370-510 350-480 350-480 23-24
S355N 1.0545 355 345 335 325 315 295 285 275 470-630 450-600 450-600 21-22
S355NL 1.0546 355 345 335 325 315 295 285 275 470-630 450-600 450-600 21-22
S420N 1.8902 420 400 390 370 360 340 330 320 520-680 500-650 500-650 18-19
S420NL 1.8912 420 400 390 370 360 340 330 320 520-680 500-650 500-650 18-19
S460N 1.8901 460 440 430 410 400 380 370 - 540-720 530-710 - 17
S460NL 1.8903 460 440 430 410 400 380 370 - 540-720 530-710 - 17




BS EN 10025-4 :Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

Product Chemical composition

Name Number C max Si max Mn max P max S max Nb max V max Al tot Ti max Cr max Ni max Mo max Cu max N max
% % % % % % % % min % % % % % %
S275M 1.8818 0,15 0,55 1,60 0,035 0,030 0,06 0,10 0,015 0,06 0,35 0,35 0,13 0,60 0,17
S275ML 1.8819 0,15 0,55 1,60 0,030 0,025 0,06 0,10 0,015 0,06 0,35 0,35 0,13 0,60 0,17
S355M 18823 0,16 0,55 1,70 0,035 0,030 0,06 0,12 0,015 0,06 0,35 0,55 0,13 0,60 0,17
S355ML 1.8834 0,16 0,55 1,70 0,030 0,025 0,06 0,12 0,015 0,06 0,35 0,55 0,13 0,60 0,17
S420M 18825 0,18 0,55 1,80 0,035 0,030 0,06 0,14 0,015 0,06 0,35 0,85 0,23 0,60 0,27
S420ML 1.8836 0,18 0,55 0,17 0,030 0,025 0,06 0,14 0,015 0,06 0,35 0,85 0,23 0,60 0,27
S460M 18827 0,18 0,65 0,17 0,035 0,030 0,06 0,14 0,015 0,06 0,35 0,85 0,23 0,60 0,27
S460ML 1.8838 0,18 0,65 1,80 0,030 0,025 0,06 0,14 0,015 0,06 0,35 0,85 0,23 0,60 0,27

Basic mechanical properties at room temperature

Name Number R eH Minimum Yield strength (MPa)
for nominal thickness(mm)
Rm (MPa)
for nominal thickness (mm)
A.
Elongation (min)
<16 >16 >40 >63 >80 >100 <=40 >40 >63 >80 >100
=< 40 =< 63 =< 80 =< 100 =< 120 =<63 =<80 =<80 =<120 %
S275M 1.8818 275 265 255 245 245 240 370-530 360-520 350-510 350-510 350-510 24
S275ML 1.8819 275 265 255 245 245 240 370-530 360-520 350-510 350-510 350-510 24
S355M 18823 355 345 335 325 325 320 470-630 450-610 440-600 440-600 430-590 22
S355ML 1.8834 355 345 335 325 325 320 470-630 450-610 440-600 440-600 430-590 22
S420M 18825 420 400 390 380 370 365 520-680 500-660 480-640 470-630 460-620 19
S420ML 1.8836 420 400 390 380 370 365 520-680 500-660 480-640 470-630 460-620 19
S460M 18827 460 440 430 410 400 385 540-720 530-710 510-690 500-680 490-660 17
S460ML 1.8838 460 440 430 410 400 385 540-720 530-710 510-690 500-680 490-660 17




BS EN 10025-5 :Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

Product Chemical composition

Deoxidation Method
FN = Rimming steels not permitted
FF = Fully killed steel

Name Number Method;
of
Deoxidation
C Si Mn P S N Cr Cu others
max % max % % % max % max % % %
S235J0W 1.8958 FN 0,16 0,45 0,15-0,70 max0,040 0,040 0,010 0,35-0,85 0,20-0,60 Ni max 0,70
S235J2W 1.8961 FF 0,16 0,45 0,15-0,70 max0,040 0,035 0,010 0,35-0,85 0,20-0,60 Ni max 0,70
S355J0WP 1.8945 FN 0,15 0,80 max 1,1 0,05-0,16 0,040 0,010 0,25-1,35 0,20-0,60 Ni max 0,70
S355J2WP 1.8946 FF 0,15 0,80 max 1,1 0,05-0,16 0,035 0,010 0,25-1,35 0,20-0,60 Ni max 0,70
S355J0W 1.8959 FN 0,19 0,55 0,45-1,6 max 0,040 0,040 0,010 0,35-0,85 0,20-0,60 Ni max 0,70
S355J2W 1.8965 FF 0,19 0,55 0,45-1,6 max 0,035 0,035 0,010 0,35-0,85 0,20-0,60 Ni max 0,70
S355K2W 1.8967 FF 0,19 0,50 0,45-1,6 max 0,035 0,035 0,010 0,35-0,85 0,20-0,60 Ni max 0,70

Basic mechanical properties at room temperature

Name Number R eH Minimum Yield strength (MPa)
for nominal thickness(mm)
Rm (MPa)
for nominal thickness (mm)
A
Elongation (min)
<16 >16 >40 >63 >80 >100 <3 >3 >100
=< 40 =< 63 =< 80 =< 100 =< 150 =<100 =< 150 %
S235J0W 1.8958 235 225 215 215 215 195 360-510 360-510 350-500 19-22
S235J2W 1.8961 235 225 215 215 215 195 360-510 360-510 350-500 17-22
S355J0WP 1.8945 355 345 - - 510-680 470-630 - 16-22
S355J2WP 1.8946 355 345 - - 510-680 470-630 - 14-20
S355J0W 1.8959 355 345 335 325 315 295 510-680 470-630 450-600 16-22
S355J2W 1.8965 355 345 335 325 315 295 510-680 470-630 450-600 14-20
S355K2W 1.8967 355 345 335 325 315 295 510-680 470-630 450-600 14-20




BS EN 10025-6 :Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Product Chemical composition

Quality C Si Mn P S N B Cr Cu Mo Nb Ni Ti V Zr
max % max % max % max % max % max % max % max % max % max % max % max % max % max % max %
No symbo; 0,22 0,86 1,8 0,030 0,017 0,016 0,006 1,60 0,055 0,74 0,07 2,1 0,07 0,14 0,17
L 0,22 0,86 1,8 0,025 0,012 0,016 0,006 1,60 0,055 0,74 0,07 2,1 0,07 0,14 0,17
L1 0,22 0,86 1,8 0,025 0,012 0,016 0,006 1,60 0,055 0,74 0,07 2,1 0,07 0,14 0,17

Basic mechanical properties at room temperature

Name Number R eH Minimum Yield strength (MPa)
for nominal thickness(mm)
Rm (MPa)
for nominal thickness (mm)
A
Elongation min )
=> 3 >50 >100 =>3 >50 >100
=< 50 =< 100 =< 150 =< 50 =< 100 =< 150 %
S460Q 1.8908 460 440 400 550-720 550-720 500-670 17
S460QL 1.8906 460 440 400 550-720 550-720 500-670 17
S460QL1 1.8916 460 440 400 550-720 550-720 500-670 17
S500Q 1.8924 500 480 440 590-770 590-770 540-720 17
S500QL 1.8909 500 480 440 590-770 590-770 540-720 17
S500QL1 1.8984 500 480 440 590-770 590-770 540-720 17
S550Q 1.8904 550 530 490 640-820 640-820 590-770 16
S550QL 1.8926 550 530 490 640-820 640-820 590-770 16
S550QL1 1.8986 550 530 490 640-820 640-820 590-770 16
S620Q 1.8914 620 580 560 700-890 700-890 650-830 15
S620QL 1.8927 620 580 560 700-890 700-890 650-830 15
S620QL1 1.8987 620 580 560 700-890 700-890 650-830 15
S690Q 1.8931 690 650 630 770-940 760-930 710-900 14
S690QL 1.8928 690 650 630 770-940 760-930 710-900 14
S690QL1 1.8988 690 650 630 770-940 760-930 710-900 14
S890Q 1.8940 890 830 - 940-1100 880-1100 - 11
S890QL 1.8983 890 830 - 940-1100 880-1100 - 11
S890QL1 1.8925 890 830 - 940-1100 880-1100 - 11
S960Q 1.8941 960 - - 980-1150 - - 10
S960QL 1.8933 960 - - 980-1150 - - 10

High-strength steels for cold-forming, thermomechanically-rolled

Usage

The steel grades of the S315MC to S700MC series are used for cold-formed components of the most varied designs. Their fields of application include the manufacture of:

  • Longitudinal beams
  • Frames
  • Cold-pressed parts
  • Cold-rolled sections
  • Structural pipes

The user of these steel grades must make sure that his calculation, design and processing methods are appropriate for the material. The forming process used must be suitable for the intended application and comply with the state-of-the-art; it is of fundamental importance to the processing behaviour of these steel grades.

These low-perlite steel grades offer excellent bending, flanging, cold-bordering and folding properties in both longitudinal and transverse direction. The bending radii specified below should be observed as minimum values.

Standards

Europe Material no. D F I GB USA Salzgitter Flachstahl FK1)
EN 10149-2 SEW 092 NFA 36-231 UNI 8890 BS 1449 Sec. 1.4 ASTM A 1011/ SAE J 1392
S315MC 1.0972 - E 315 D - HR 40F30 045 XLK PSQ 32 B
1.0974 QStE 340 TM - - - HSLAS-F Gr. 50 [340]/050 XLK PSQ 34 B
S355MC 1.0976 - E 355 D Fe E 355 TM HR 43F35 - PSQ 36 B
1.0978 QStE 380 TM - - HR 46F40 - PSQ 38 B
S420MC 1.0980 QStE 420 TM E 420 D Fe E 420 TM - HSLAS-F Gr. 60 [410]/060 XLK PSQ 42 C
S460MC 1.0982 QStE 460 TM - - HR 50F45 - PSQ 46 C
S500MC 1.0984 QStE 500 TM E 490 D Fe E 490 TM - HSLAS-F Gr. 70 [480]/070 XLK PSQ 50 D
S550MC 1.0986 QStE 550 TM E 560 D Fe E 560 TM - HSLAS-F Gr. 80 [550]/080 XLK PSQ 55 D
S600MC 1.8969 - E 620 D - - - PSQ 60 D
S650MC 1.8976 - - - - - PSQ 65 D
S700MC 1.8974 - E 690 D - - - PSQ 70 D

1) FK = Tensile strength class

The following limitation shall additionally apply to all steel grades:
Nb ? 0,09 %, V ? 0,20 %,
with the total of Nb, V and Ti not exceeding 0,22 %.

Smallest bending radius

Grade Smallest recommended bending radius bending angles ? 90°
e1) ? 3 3 < e1) < 6 e1) > 6
S315MC 0,25 e 0,5 e 1,0 e
QStE 340 TM 0,25 e 0,5 e 1,0 e
S355MC 0,25 e 0,5 e 1,0 e
QStE 380 TM 0,25 e 0,5 e 1,0 e
S420MC 0,5 e 1 ,0 e 1,5 e
S460MC 0,5 e 1,0 e 1,5 e
S500MC 1,0 e 1,5 e 2,0 e
S550MC 1,0 e 1,5 e 2,0 e
S600MC 1,0 e 1,5 e 2,0 e
S650MC 1,5 e 2,0 e 2,5 e
S700MC 1,5 e 2,0 e 2,5 e

1) Nominal thickness e [mm]

Chemical composition in percent by weight [%] (Heat analysis)

Grade C Si Mn P S 1) Altotal Mo Ti B
max. max. max. max. max. min. max. max. max.
S315MC 0,12 0,50 1,30 0,025 0,020 0,015 - 0,15 -
QStE 340 TM 0,12 0,50 1,30 0,025 0,010 0,015 - - -
S355MC 0,12 0,50 1,50 0,025 0,020 0,015 - 0,15 -
QStE 380 TM 0,12 0,50 1,50 0,025 0,010 0,015 - - -
S420MC 0,12 0,50 1,60 0,025 0,015 0,015 - 0,15 -
S460MC 0,12 0,50 1,60 0,025 0,015 0,015 - 0,15 -
S500MC 0,12 0,50 1,70 0,025 0,015 0,015 - 0,15 -
S550MC 0,12 0,50 1,80 0,025 0,015 0,015 - 0,15 -
S600MC 0,12 0,50 1,90 0,025 0,015 0,015 0,50 0,22 0,005
S650MC 0,12 0,60 2,00 0,025 0,015 0,015 0,50 0,22 0,005
S700MC 0,12 0,60 2,10 0,025 0,015 0,015 0,50 0,22 0,005

1) If agreed in the order, the sulphur content is 0,010 % max.

Mechanical properties1)

Grade Min. yield strength Tensile strength Min. total elongation [%]
MPa MPa L0 = 80 mm
e2) < 3
L0 = 5,65 ?S0
e2) ? 3
S315MC 315 390 – 510 20 24
QStE 340 TM 340 420 – 540 19 23
S355MC 355 430 – 550 19 23
QStE 380 TM 380 450 – 590 18 22
S420MC 420 480 – 620 16 19
S460MC 460 520 – 670 14 17
S500MC 500 550 – 700 12 14
S550MC 550 600 – 760 12 14
S600MC 600 650 – 820 11 13
S650MC 6502) 700 – 880 10 12
S700MC 7002) 750 – 950 10 12

1) The tensile test values apply to longitudinal samples for QStE 340 TM and QStE 380 TM in widths
? 600 mm tensile test values apply to transvers samples.
2) In case the thickness is > 8 mm, the yield strength values may be reduced by 20 MPa.
3) Nominal thickness e [mm]

Notch impact energy

If agreed in the order, the notch impact energy is proved using longitudinal samples at -20 °C. The average notch impact energy from 3 samples must be 40 J minimum. One individual value may fall short of the required minimum value by not more than 30 %. The sample width shall equal the product thickness if the latter is between 5 and 10 mm, the tests being performed using samples which are similar to Charpy-V samples. The required minimum values are to be reduced proportionally to the sample width.

Heat treatment

Normalised and stress relief annealing above 580 °C with long holding times results in a reduction of yield strength and tensile strength as compared to the ‘as-delivered’ condition which is why such heat treatments should be avoided. It also follows that these steel grades are not suitable for hot-forming. If low-voltage annealing is necessary to compensate for the welding stresses, the recommended annealing time between 530 °C and 580 °C is 30 minutes for all product thicknesses and steel grades.

Welding

These steel grades can be welded both manually and using automatic equipment by means of all electrical welding processes provided the general technical rules are observed. No major hardness increases appear in the heat-affected zone. Preheating is not necessary under normal welding conditions and down to workpiece temperatures of +5 °C. Below +5 °C, pre-heating to 150 °C is recommended.

The welding wires and electrodes approved in the respective strength category must be used as filler metals.

In addition to this, the general meaning of the detailed information provided in ‘Stahl-Eisen-Werkstoffblatt’ (Iron and steel material sheet) 088 must be observed.

Condition of delivery, scope of testing and certificate

The provisions of EN 10149-2 shall apply for delivery and inspection. The products are delivered in a thermomechanically-rolled condition.

Hot Work Tool Steels

HOT WORK TOOL STEEL

DIN 1.2343, X37CrMoV5-1, ASTM / SAE / AISI H11, JIS SKD6
DIN 1.2344, X40CrMoV5-1, ASTM / SAE / AISI H13, JIS SKD61
DIN 1.2365, 32CrMoV12-28, ASTM / SAE / AISI H10, JIS SKD7
DIN 1.2367, X38CrMoV5-3
DIN 1.2714, 55NiCrMoV7, ASTM / SAE / AISI L6, JIS SKT4

 

 
Equivalent Grades
American
German
Japanese
China
Poland
(W.Nr)
(DIN)
AISI H11
1.2343
GX38CrMoV5-1
SKD6
4Cr5MoSiV
WCL
AISI H13
1.2344
GX40CrMoV5-1
SKD61
4Cr5MoSiV1
L40H5MF/WCLV
AISI H10
1.2365
32CrMoV12-28
-
-
WLV
AISI H21
1.2581
X30WCrV9-3
SKD5
3Cr2W8V
WWV
 

 

 

 
 
 
C
Si
Mn
P
S
Cr
Mo
V
W
AISI H11
0.36-0.42
0.90-1.20
0.30-0.50
0.00-0.030
0.00-0.030
4.80-5.50
1.10-1.40
0.25-0.50
-
AISI H13
0.37-0.43
0.90-1.20
0.30-0.50
0.00-0.030
0.00-0.030
4.80-5.50
1.20-1.50
0.90-1.10
-
AISI H10
0.35-0.45
0.80-1.20
0.25-0.70
-
-
3.00-3.75
2.00-3.00
0.25-0.75
-
AISI H21
0.30-0.40
0.15-0.30
0.20-0.40
-
-
3.00-3.75
2.00-3.00
0.30-0.50

8.75
-10.00

 

 

 
Equivalent Grades
American
German
Japanese
China
Poland
(W.Nr)
(DIN)
AISI H-11
DIN 1.2343
GX38CrMoV5-1
SKD-6
4Cr5MoSiV
WCL
AISI H-13
DIN 1.2344
GX40CrMoV5-1
SKD-61
4Cr5MoSiV1
L40H5MF/WCLV
AISI H-10
DIN 1.2365
32CrMoV12-28
-
-
WLV
AISI H-21
DIN 1.2581
X30WCrV9-3
SKD-5
3Cr2W8V
WWV
 

 

 

 
 
 
C
Si
Mn
P
S
Cr
Mo
V
W
AISI H-11
0.36-0.42
0.90-1.20
0.30-0.50
0.00-0.030
0.00-0.030
4.80-5.50
1.10-1.40
0.25-0.50
-
AISI H-13
0.37-0.43
0.90-1.20
0.30-0.50
0.00-0.030
0.00-0.030
4.80-5.50
1.20-1.50
0.90-1.10
-
AISI H-10
0.35-0.45
0.80-1.20
0.25-0.70
-
-
3.00-3.75
2.00-3.00
0.25-0.75
-
AISI H-21
0.30-0.40
0.15-0.30
0.20-0.40
-
-
3.00-3.75
2.00-3.00
0.30-0.50

8.75
-10.00

 

 

APPLICATION
RECOMMENDED QUALITIES
   
Axles & Axle Components EN-24, EN-19
Arbors EN-24
Backing-out Tools AISI T1, AISI T4
Beading Tools HCHC AISI D3 / HCHC AISI D2
Bits-Router AISI T1 / AISI T4
Bits/Tool Holder AISI M2/AISI T1/AISI T4
Blacksmith’s Tools 1% CARBON TOOL STEEL
Boring Tools AISI T1, AISI T4, AISI M2
Brick Mould Liners HC HC AISI D3
Ball Races EN-31
Broaches AISI-T1
Bushes OHNS, HC HC
Calipers OHNS, 1% CARBON STEEL
Cams HC HC
Caulking Tools MY EXTRA
Chasers-Screw Thread AISI T1, AISI M2
Chisels-Pheumatic MY EXTRA
Chisels-Hot HOT DIE AISI H11
Coal Cutters MY EXTRA
Collets EN-47
Concrete Moulds HC HC AISI D3
Cores-Die Casting HOT DIE STEEL
Concrete Breakers MY EXTRA
Counter-Bores (Countersinks) AISI T1
Cropper Blades-Cold HC HC AISI D3
Cold Extrusion Dies HC HC AISI D3 / AISI D2
Cold Forming Rolls HC HC AISI D3
Cold Punches HC HC AISI D3 / HC HC AISI D2
Cutters AISI T1, AISI M2
Die Bases (Impact Extrusion) HC HC AISI D3, HC HC AISI D2
Dies-Blanking-Cold HC HC AISI D3, HC HC AISI D2
Ceramic Moulding HC HC AISI D3, HC HC AISI D2
Dies-Coining, Cold Extrusion HC HC AISI D3, HC HC AISI D2
Dies-Extrusion-Hot HOT DIE STEEL AISI H24/AISI H11
Diesel Oil injector Nozzles AISI T1
Drawing Plugs HC HC AISI D3
Drills AISI T1, AISI M2
Drills Plates OHNS
Engraving Tools AISI T1
Extrusion Liners EN24
File Catting Chisels AISI T1
Gauges OHNS, HC HC AISC D3
Gear Cutters AISI T1
Gripper Dies MY EXTRA, HC HC AISI D3
Guillotine Blades HC HC AISI D3
Hacksaw Slotting Cutters AISI T1
Knives-Guillotine HC HC AISI D3
Lathe Tools AISI T1, AISI T4
Lines-Extrusion EN-24
Layshafts EN-36
Magneto Drive Coupling, Shaft and Wheels EN-24, EN-36
Mandrels-Tube Drawing HC HC AISI D3
Milling Cutters AISI T1, AISI T4
Parting Tools AISI T1, AISI T4
Pins SILVER STEEL (SAE 52100)
Planer Tools AISI T1, AISI M2
Plug Gauges HC HC / OHNS
Pneumatic Tools MY EXTRA
Punches OHNS / HC HC
Pinion Shafts EN-24
Pinions EN-24
Reamers AISI T1
Ring Gauges OHNS
Rivet Snaps / Sets MY EXTRA
Rolls-Cold Forming HC HC AISI D3
Seaming Rolls HC HC AISI D3, HC HC AISI D2
Shear Blades HC HC AISI D3
Spinning Tools HC HC AISI D3, HC HC AISI D2
Taps AISI T1 AISI T4
Thread Milling Cutters AISI T1, AISI T4
Thread Gauges OHNS
Tool Bits AISI T1, AISI M2
Tube Drawing Plugs HCHC AISI D3
Weighing Machine Pivots OHNS

Chemical Composition

CHEMICAL COMPOSITION

Standard 300 series austenitic grades

Designation

Chemical composition % by mass max unless stated

UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S30100 30301 301 0.15 1.00 2.00 0.045 0.030 16.0/18.0 - 6.00/8.00 N 0.10
S30103 - 301L 0.03 1.00 2.00 0.045 0.030 16.0/18.0 - 6.00/8.00 N 0.20
S30153 - 301LN 0.03 1.00 2.00 0.045 0.030 16.0/18.0 - 6.00/8.00 N 0.07/0.20
S30200 30302 302 0.15 0.75 2.00 0.045 0.030 17.0/19.0 - 8.00/10.0 -
S30215 30302B 302B 0.15 2.00/3.00 2.00 0.045 0.030 17.0/19.0 - 8.00/10.0 -
S30300 30303 303 0.15 1.00 2.00 0.20 0.15 min 17.0/19.0 0.60 8.00/10.0 Zr 0.60
S30310 - XM-5 (303Plus x) 0.15 1.00 2.50/4.50 0.20 0.25 min 17.00/19.00 - 7.00/9.00 -
S30323 30303Se 303Se 0.15 1.00 2.00 0.20 0.060 17.0/19.0 - 8.00/10.0 Se 0.15 min
S30330 - 303Cu 0.15 1.00 2.00 0.15 0.10 min 17.00/19.00 - 6.00/10.00 Cu 2.5/4.00; Se 0.10
S30400 30304 304 0.08 0.75 2.00 0.045 0.030 18.0/20.0 - 8.00/10.5 -
S30403 30304L 304L 0.03 0.75 2.00 0.045 0.030 18.0/20.0 - 8.00/12.0 -
S30430 - 302HQ 0.03 1.00 2.00 0.045 0.030 17.0/19.0 - 8.0/10.0 Cu 3.0/4.0
S30452 - XM-21 (304HN) 0.08 1.00 2.00 0.045 0.030 18.0/20.0 - 8.00/10.00 N 0.16/0.30
S30453 - 304LN 0.030 0.75 2.00 0.045 0.030 18.0/20.0 - 8.00/12.0 N 0.10/0.16
S30454 - - 0.03 1.00 2.00 0.045 0.030 18.0/20.0 - 8.0/11.0 N 0.16/0.30
S30500 30305 305 0.12 1.00 2.00 0.045 0.030 17.0/19.0 - 10.5/13.0 -
S30800 30308 308 0.08 1.00 2.00 0.045 0.030 19.0/21.0 - 10.0/12.0 -
S31600 30316 316 0.08 1.00 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 -
S31603 30316L 316L 0.03 1.00 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 -
S31635 - 316Ti 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 Ti 5x (C+N) / 0.70
S31640 - 316Cb 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 Nb 10x C / 1.10
S31653 - 316LN 0.03 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10/0.16
S31700 30317 317 0.08 1.00 2.00 0.045 0.030 18.0/20.0 3.00/4.00 11.0/15.0 -
S31703 - 317L 0.030 0.75 2.00 0.045 0.030 18.0/20.0 3.00/4.00 11.0/15.0 N 0.10
S31725 - 317LM 0.030 0.75 2.00 0.045 0.030 18.0/20.0 4.0/5.0 13.5/17.5 N 0.20
S31726 - 317LMN 0.030 0.75 2.00 0.045 0.030 17.0/20.0 4.0/5.0 13.5/17.5 N 0.10/0.20
S31753 - 317LN 0.030 0.75 2.00 0.045 0.030 18.0/20.0 3.0/4.0 11.0/15.0 N 0.10/0.20
S32100 30321 321 0.08 1.00 2.00 0.045 0.030 17.0/19.0 - 9.00/12.0 5 Ti 5 x C min
S34700 30347 347 0.08 1.00 2.00 0.045 0.030 17.0/19.0 - 9.00/13.0 Nb+Ta 10 x C min
S34720 - 347F 0.08 1.00 2.00 0.040 0.18/0.35 17.00/19.00 0.75 9.00/12.00 Nb 10xC / 1.10; Cu 0.75; Ta 0.05
S34723 - 347FSe 0.08 1.00 2.00 0.11/0.17 0.030 17.00/19.00 0.75 9.00/12.00 Nb 10xC / 1.10; Cu 0.75; Se 0.15/0.35; Ta 0.05
S34800 30348 348 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.00/13.0 Nb+Ta 10 x C / 1.00; Ta:0.10 max; Co 0.20
S38400 30384 384 0.08 1.00 2.00 0.045 0.030 15.0/17.0 - 17.0/19.0 -

Standard 200 series austenitic grades

Designation

Chemical composition % by mass max unless stated

UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
                       
S20100 30201 201 0.15 1.00 5.50/7.50 0.060 0.030 16.0/18.0 - 3.50/5.50 N 0.25
S20103 - - 0.03 0.75 5.5/7.5 0.045 0.030 16.0/18.0 - 3.5/5.5 N 0.25
S20153 - - 0.03 0.75 6.4/7.5 0.045 0.015 16.0/17.5 - 4.0/5.0 N 0.10/0.25; Cu 1.00
S20161 - Gall-Tough 0.15 3.0/4.0 4.0/6.0 0.040 0.040 15.0/18.0 - 4.0/6.0 N 0.08/0.20
S20162 - - 0.15 2.5/4.5 4.0/8.0 0.040 0.040 16.5/21.0 0.05/0.25 6.0/10.0 N 0.05/0.25
S20200 30202 202 0.15 1.00 7.50/10.0 0.060 0.030 17.0/19.0 - 4.00/6.00 N 0.25
S20300 - XM-1 (203EZ) 0.08 1.00 5.0/6.5 0.045 0.18/0.35 16.0/18.0 - 5.0/6.5 Cu 1.75/2.25
S20400 - - 0.030 1.00 7.0/9.0 0.040 0.030 15.0/17.0 - 1.50/3.00 N 0.15/0.30
S20500 - 205 0.12/0.25 1.00 14.0/15.5 0.060 0.030 16.5/18.0 - 1.0/1.7 N 0.32/0.40
S20910 - XM-19 (Nitronic 50) 0.06 0.75 4.0/6.0 0.040 0.030 20.5/23.5 1.50/3.00 11.5/13.5 Nb 0.10/0.30; V 0.10/0.30
S21400 - XM-31 (Tenelon) 0.12 0.30/1.00 14.0/16.0 0.045 0.030 17.0/18.5 - 1.00 -
S21460 - XM-14 0.12 0.75 14.0/16.0 0.060 0.030 17.0/19.0 - 5.0/6.0 N 0.35/0.50
S21600 - XM-17 (216) 0.08 0.75 7.5/9.0 0.045 0.030 17.5/22.0 2.00/3.00 5.0/7.0 N 0.25/0.50
S21603 - XM-18 (216L) 0.03 0.75 7.5/9.0 0.045 0.030 17.5/22.0 2.00/3.00 5.0/7.0 N 0.25/0.50
S21800 - Nitronic 60 0.10 3.5/4.5 7.0/9.0 0.060 0.030 16.0/18.0 - 8.0/9.0 N 0.08/0.18
S21900 - 21-6-9 (Nitronic 40) 0.08 1.00 8.00/10.00 0.045 0.030 19.0/21.50 - 5.50/7.50 N 0.15/0.40
S21904 - XM-11 (Nitronic 40) 0.04 1.00 8.00/10.00 0.045 0.030 19.00/21.50 - 5.50/7.50 N 0.15/0.40
S24000 - XM-29 (Nitronic 33) 0.08 0.75 11.5/14.5 0.060 0.030 17.0/19.0 - 2.3/3.7 N 0.20/0.40
S24100 - 18-2Mn (Nitronic 32) 0.15 1.00 11.0/14.0 0.045 0.030 16.5/19.00 - 0.50/2.50 N 0.20/0.45
S28200 - 18-18 Plus 0.15 1.00 17.00/19.00 0.045 0.030 17.00/19.00 0.75/1.25 - N 0.40/0.60; Cu 0.75/1.25

Special austenitic grades

Designation

Chemical composition % by mass max unless stated

UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
N08020 - 20Cb-3 0.07 1.00 2.00 0.045 0.035 19.0/21.0 2.00/3.00 32.0/38.0 Cu 3.0/4.0; Nb 8xC / 1.00
N08024 - 20Mo-4 0.03 0.50 1.00 0.035 0.035 22.50/25.00 3.50/5.00 35.00/40.00 Cu 0.50/1.50; Nb+Ta 0.15/0.35
N08026 - 20Mo6 0.03 0.50 1.00 0.03 0.03 22.00/26.00 5.00/6.70 33.0/37.20 Cu 2.00/4.00; N 0.10/0.16
N08028 - Sanicro28 0.030 1.0 2.50 0.030 0.030 26.0/28.0 3.0/4.0 30.0/34.0 Cu 0.6/1.4
N08366 - AL-6X 0.035 1.00 2.00 0.040 0.030 20.00/22.00 6.00/7.00 23.50/25.50 -
N08367 - AL-6XN 0.030 1.00 2.00 0.040 0.030 20.0/22.0 6.0/7.0 23.5/25.5 Cu 0.75; N 0.18/0.25
N08700 - JS700 0.04 1.00 2.00 0.040 0.030 19.0/23.0 4.3/5.0 24.0/26.0 Cu 0.50; Nb 8xC / 0.40
N08904 - 904L 0.020 1.00 2.00 0.045 0.035 19.0/23.0 4.0/5.0 23.0/28.0 Cu 1.0/2.0
N08925 - 1925hMo 0.020 0.50 1.0 0.045 0.030 19.0/21.0 6.0/7.0 24.0/26.0 Cu 0.8/1.5; N 0.1/0.2
N08926 - - 0.020 1.50 2.00 0.030 0.010 19.0/21.0 6.0/7.0 24.0/26.0 Cu 0.5/1.5; N 0.15/0.25
S30600 - Cronifer 1815 LCSi 0.018 3.7/4.3 2.00 0.020 0.020 17.0/18.5 0.20 14.0/15.5 Cu 0.50
S30601 - - 0.015 5.0/5.6 0.50/0.80 0.030 0.013 17.0/18.0 0.20 17.0/18.0 Cu 0.05; N 0.35
S31050 - 310MoLN 0.020 0.50 2.00 0.030 0.010 24.0/26.0 1.60/2.60 0.09/0.15 N 0.09/0.15
S31254 - 254SMO 0.020 0.80 1.00 0.030 0.010 19.5/20.5 6.0/6.5 17.5/18.5 Cu 0.50/1.00; N 0.18/0.22
S31266 - - 0.030 1.00 2.0/4.0 0.035 0.020 23.0/25.0 5.2/6.2 21.0/24.0 Cu 1.00/2.50; N 0.35/0.60; W 1.50/2.50
S31277 - - 0.020 0.50 3.00 0.030 0.010 20.5/23.0 6.5/8.0 26.0/28.0 Cu 0.5/1.50; N 0.30/0.40
S32050 - - 0.030 1.00 1.50 0.035 0.020 22.0/24.0 6.0/6.8 20.0/23.0 Cu 0.40
S32615 - - 0.07 4.8/6.0 2.00 0.045 0.030 16.5/19.5 0.30/1.50 19.0/22.0 Cu 1.50/2.50
S32654 - 654SMO 0.020 0.50 2.0/4.0 0.030 0.005 24.0/25.0 7.0/8.0 21.0/23.0 Cu 0.30/0.60; N 0.45/0.55
S34565 - Nirosta 4565S 0.030 1.00 5.0/7.0 0.030 0.010 23.0/25.0 4.0/5.0 16.0/18.0 N 0.40/0.60; Nb 10x C / 1.00
S35135 - - 0.08 0.60/1.00 1.00 0.045 0.015 20.0/25.0 4.0/4.8 30./38.0 Ti 0.40/1.00
S38100 - XM-15 (18-18-2) 0.08 1.50/2.50 2.00 0.030 0.030 17.0/19.0 - 17.5/18.5 -
S38815 - - 0.030 5.5/6.5 2.00 0.040 0.020 13.0/15.0 0.75/1.50 13.0/17.0 Cu 0.75/1.50; Al 0.30

Chemical compositions of AISI (ASTM/ASME) and UNS ferritic stainless steel grades

Designation

Chemical composition % by mass max unless stated

UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S18200 - XM-34 (18-2FM) 0.08 1.00 2.50 0.04 0.15 min 17.5/19.5 1.50/2.50 - -
S18235 - - 0.025 1.00 0.50 0.030 0.15/0.35 17.5/18.5 2.00/2.50 1.00 N 0.025; (C+N) 0.035; Ti 0.30/1.00
S40300 51403 403 0.15 0.50 1.00 0.040 0.030 11.5/13.0 - - -
S40500 51405 405 0.08 1.00 1.00 0.040 0.030 11.5/14.5 - - Al 0.10./0.30
S40800 - - 0.08 1.00 1.00 0.045 0.045 11.5/13.0 - 0.50 Ti 12xC/1.10
S40900 51409 409 0.08 1.00 1.00 0.045 0.045 10.5/11.75 - 0.50 Ti 6xC/0.75
S40910 - - 0.030 1.00 1.00 0.040 0.020 10.5/11.7 - 0.50 N 0.030; Ti: 6x(C+N)/0.50; Nb 0.17
S40920 - - 0.030 1.00 1.00 0.040 0.020 10.5/11.7 - 0.50 N 0.030; Ti 0.15/0.50; Nb 0.10
S40930 - - 0.030 1.00 1.00 0.040 0.020 10.5/11.7 - 0.50 N 0.030; (Ti+Nb) [0.08+8x(C+N)]/0.75; Ti 0.05
S40945 - - 0.030 1.00 1.00 0.040 0.030 10.5/11.7 - 0.50 N 0.030; Ti 0.05/0.20; Nb 0.18/0.40
S40975 - - 0.030 1.00 1.00 0.040 0.030 10.5/11.7 - 0.50/1.00 N 0.030; Ti: 6x(C+N)/0.75
S40976 - - 0.030 1.00 1.00 0.040 0.030 10.5/11.7 - 0.75/1.00 N 0.040; Nb 10x(C+N)-0.80
S40977 - - 0.030 1.00 1.00 0.040 0.015 10.5/12.5 - 0.30/1.00 N 0.030
S41003 - - 0.030 1.00 1.50 0.040 0.030 10.5/12.5 - 1.50 -
S41008 - 410S 0.08 1.00 1.00 0.040 0.030 11.5/13.5 - - -
S41045 - - 0.030 1.00 1.00 0.040 0.030 12.0/13.0 - 0.50 N 0.030; Nb 9x(C+N)/0.60
S41050 - - 0.04 1.00 1.00 0.040 0.030 10.5/12.5 - 0.60/1.10 N 0.10
S41500 - - 0.05 0.60 0.50/1.00 0.030 0.030 11.5/14.0 0.50/1.00 3.5/5.5 -
S41603 - - 0.08 1.00 1.25 006 0.15min 12.0/14.0 - - -
S42035 - - 0.08 1.00 1.00 0.045 0.030 13.5/15.5 0.2/1.2 - Ti 0.30/0.50
S43000 51430 430 0.12 1.00 1.00 0.040 0.030 16.0/18.0 - - -
S43020 51430F 430F 0.12 1.00 1.25 0.060 0.15 min 16.0/18.0 0.60 - -
S43023 51430FSe 430FSe 0.12 1.00 1.25 0.060 0.060 16.0/18.0 - - Se 0.15
S43036 - 430Ti 0.10 1.00 1.00 0.040 0.030 16.00/19.50 - 0.75 Ti 5xC/0.75
S43400 51434 434 0.08 1.00 1.00 0.040 0.030 16.0/18.0 0.75/1.25 - -
S43600 51436 436 0.08 1.00 1.00 0.040 0.030 16.0/18.0 0.75/1.25 - Nb+Ta 5xC/0.70
S44200 51442 442 0.20 1.00 1.00 0.040 0.035 18.0/23.0 - - -

Special ferritic grades

Designation

Chemical composition % by mass max unless stated

UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S32803 - Cronifer 2803Mo 0.015 0.55 0.50 0.020 0.0035 28.0/29.0 1.80/2.50 3.0/4.0 N 0.020; (C+N) 0.030; Nb 0.15/0.50
S43035 - 435 0.030 1.00 1.00 0.040 0.030 17.0/19.0 - 0.50 Ti [0.20+4(C+N)] / 1.10; Al 0.15
S43900 51439 439 0.07 1.00 1.00 0.040 0.030 17.0/19.0 - 0.50 Ti [0.20+4(C+N)] / 1.10; Al 0.15; N:0.04
S43903 51439LL 439LL 0.014 1.00 1.00 0.040 0.030 17.0/19.0 - 0.50 Ti [0.20+4(C+N)] / 1.10; Al 0.15; N:0.04
S43932 - - 0.030 1.00 1.00 0.040 0.030 17.0/19.0 - 0.50 N 0.030; (Ti+Nb) [0.20+4(C+N)] / 0.75; Al 0.15
S43940 - - 0.030 1.00 1.00 0.040 0.015 17.5/18.5 - 0.50 Ti 0.10/0.60; Nb [0.30+(3xC)] min
S44400 - 444 18Cr-2Mo 0.025 1.00 1.00 0.040 0.030 17.5/19.5 1.75/2.50 1.00 N 0.035; (Ti+Nb)[0.20+4(C+N)] / 0.80
S44500 - - 0.020 1.00 1.00 0.040 0.012 19.0/21.0 - 0.60 N 0.03; Cu 0.30/0.60; Nb 10x(C+N) / 0.80
S44626 - XM-33 (26-1Ti) 0.06 0.75 0.75 0.040 0.020 25.0/27.0 0.75/1.50 0.50 N 0.04; Cu 0.20; Ti 0.20/1.00
S44627 - XM-27 0.010 0.40 0.40 0.020 0.020 25.0/27.0 0.75/1.50 0.50 N 0.015; Cu 0.20; Nb 0.05/0.20; (Ni+Cu) 0.50
S44635 - Nu Monit (25-4-4) 0.025 0.75 1.00 0.040 0.030 24.5/26.0 3.5/4.5 3.5/4.5 N 0.035; (Ti+Nb){0.20+4(C+N)] / 0.80
S44660 - Sea-cure (26-3-3) 0.030 1.00 1.00 0.040 0.030 25.0/28.0 3.0/4.0 1.0/3.5 N 0.040; (Ti+Nb)0.20 / 1.00; (Ti+Nb) [6x(C+N)] min
S44700 - 29-4 0.010 0.20 0.30 0.025 0.020 28.0/30.0 3.5/4.2 0.15 N 0.020; Cu 0.15; (C+N) 0.025
S44735 - - 0.030 1.00 1.00 0.040 0.030 28.0/30.0 3.6/4.2 1.00 N 0.045; (Ti+Nb)0.20/1.00; (Ti+Nb) 6x (C+N) min
S44800 - 29-4-2 0.010 0.20 0.30 0.025 0.020 28.0/30.0 3.5/4.2 2.00/2.50 N 0.020; Cu 0.15; (C+N) 0.025
S46800 - - 0.030 1.00 1.00 0.040 0.030 18.0/20.0 - 0.50 N 0.030; Ti 0.07/0.30; Nb 0.10/0.60; (Ti+Nb) [0.20+4(C+N)] / 0.80

Chemical compositions of AISI (ASTM/ASME) and UNS heat resisting stainless steel grades

Designation

Chemical composition % by mass max unless stated

UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S21500 - Esshete 1250 0.06/0.15 0.20/1.0 5.50/7.0 0.045 0.030 14.0/16.0 0.80/1.20 9.00/11.0 B 0.003/0.009; Nb 0.75/1.25; V 0.15/0.40
S30409 - 304H 0.04/0.10 0.75 2.00 0.045 0.030 18.0/20.0 - 8.0/10.5 -
S30415 - 153MA 0.04/0.06 1.00/2.00 0.80 0.045 0.030 18.0/19.0 - 9.0/10.0 N 0.12/0.18; Ce 0.03/0.08
S30451 - 304N 0.08 0.75 2.00 0.045 0.030 18.0/20.0 - 8.0/10.5 N 0.10/0.16
S30452 - 304HN (XM-21) 0.08 0.75 2.00 0.045 0.030 18.0/20.0 - 8.0/10.5 N 0.16/0.30
S30615 - RA85H 0.16/0.24 3.2/4.0 2.00 0.030 0.030 17.0/19.5 - 13.5/16.0 Al 0.80/1.50
S30815 - 253MA 0.05/0.10 1.40/2.00 0.80 0.040 0.030 20.0/22.0 - 10.0/12.0 N 0.14/0.20; Ce 0.03/0.08
S30900 30309 309 0.20 1.00 2.00 0.045 0.030 22.0/24.0 - 12.0/15.0 -
S30908 30309S 309S 0.08 0.75 2.00 0.045 0.030 22.0/24.0 - 12.0/15.0 -
S30909 - 309H 0.04/0.10 0.75 2.00 0.045 0.030 22.0/24.0 - 12.0/15.0 -
S30940 - 309Cb 0.08 0.75 2.00 0.045 0.030 22.0/24.0 - 12.0/16.0 Nb 10xC / 1.10
S30941 - 309HCb 0.04/0.10 0.75 2.00 0.045 0.030 22.0/24.0 - 12.0/16.0 Nb 10xC / 1.10
S31000 30310 310 0.25 1.50 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 -
S31008 30310S 310S 0.08 1.50 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 -
S31009 - 310H 0.04/0.10 0.75 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 -
S31040 - 310Cb 0.08 1.50 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 Nb 10xC / 1.10
S31041 - 310HCb 0.04/0.10 0.75 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 Nb 10xC / 1.10
S31400 30314 314 0.25 1.50/3.00 2.00 0.045 0.030 23.0/26.0 - 19.0/22.0 -
S31609 - 316H 0.04/0.10 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 -
S31651 - 316N 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10/0.16
S32109 - 321H 0.04/0.10 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/12.0 Ti 4x(C+N) / 0.70
S33228 - - 0.04/0.08 0.30 1.00 0.020 0.015 26.0/28.0 - 31.0/33.0 Al 0.025;Ce 0.05/0.10; Nb 0.6/1.0
S33400 - 334 0.08 1.00 1.00 0.030 0.015 18.0/22.0 - 19.0/21.0 Al 0.15/0.60; Ti 0.15/0.60
S34709 - 347H 0.04/0.10 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/13.0 Nb 8xC /1.00
S34800 - 348 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/13.0 Nb+Ta 10xC / 1.00; Ta 0.10; Co 0.20
S34809 - 348H 0.04/0.10 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/13.0 Nb+Ta 10xC /1.00; Ta 0.10; Co 0.20
S35045 - - 0.06/0.10 1.00 1.50 0.045 0.015 25.0/29.0 - 32.0/37.0 Al 0.15/0.60; Ti 0.15/0.60
S35315 - 353MA 0.04/0.08 1.20/2.00 2.00 0.040 0.030 24.0/26.0 - 34.0/36.0 N 0.12/0.18; Ce 0.03/0.10
S41041 - - 0.13/0.18 0.50 0.40/0.60 0.030 0.030 11.50/13.00 0.20 0.50 Al 0.05; Nb 0.15
S41425 - - 0.05 0.50 0.50/1.00 0.020 0.005 12.0/15.0 1.50/2.00 4.0/7.0 N 0.06/0.12; Cu 0.30
S41800 - Greek Ascoloy (615) 0.15/0.20 0.50 0.50 0.040 0.030 12.00/14.00 0.50 1.80/2.20 W 2.50/3.50
S42200 - 616 0.20/0.25 0.50 0.50/1.00 0.025 0.025 11.00/12.50 0.90/1.25 0.50/1.00 V 0.20/0.30; W 0.90/1.25
S42300 - Lapelloy (619) 0.27/0.32 0.50 0.95/1.35 0.025 0.025 11.00/12.00 2.50/3.00 0.50 V 0.20/0.30
S44300 - MT443 0.20 1.00 1.00 0.040 0.030 18.0/23.0 - 0.50 Cu 0.90/1.25
S44600 51446 446 0.20 1.00 1.50 0.040 0.030 23.0/27.0 - - N 0.25
S64152 - XM-32 0.08/0.15 0.35 0.50/0.90 0.025 0.025 11.00/12.50 1.50/2.00 2.00/3.00 N 0.01/0.05; V 0.25/0.40
N08800 - 800 (332) 0.10 1.00 1.50 0.045 0.015 19.0/23.0 - 30.0/35.0 Fe 39.5 min; Al 0.15/0.60; Ti 0.15/0.60
N08810 - 800H 0.05/0.10 1.00 1.50 0.045 0.015 19.0/23.0 30.0/35.0 30.0/35.0 Cu 0.75; Fe 39.5 min; Al 0.15/0.60; Ti 0.15/0.60
N08811 - - 0.06/0.10 1.00 1.50 0.040 0.015 19.0/23.0 - 30.0/35.0 Cu 0.75; Fe 39.5 min; Al 0.15/0.60; Ti 0.15/0.60

Chemical compositions of AISI (ASTM/ASME) and UNS martensitic and precipitation hardening stainless steel grades

designation

Chemical composition % by mass max unless stated

UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S13800 - XM-13 PH13-8Mo 0.05 0.10 0.20 0.010 0.008 12.25/13.25 2.00/2.50 7.50/8.50 N 0.01; Al 0.90/1.35
S15500 - XM-12 15-5PH 0.07 1.00 1.00 0.040 0.030 14.0/15.5 - 3.50/5.50 Cu 2.5/4.5; Nb 0.15/0.45
S15700 - 632 15-7PH 0.09 1.00 1.00 0.040 0.030 14.00/16.00 2.00/3.00 6.50/7.25 Al 0.75/1.50
S17400 - 630 17-4PH 0.07 1.00 1.00 0.040 0.030 15.5/17.5 - 3.00/5.00 Cu 3.00/5.00; Al 0.15/0.45
S17600 - 635 0.08 1.00 1.00 0.040 0.030 16.00/17.50 - 6.00/7.50 Al 0.40; Ti 0.40/1.20
S17700 - 631 17-7PH 0.09 1.00 1.00 0.040 0.040 16.00/18.00 - 6.50/7.75 Al 0.75/1.50
S35000 - 633 0.07/0.11 0.50 0.50/1.25 0.040 0.030 16.00/17.00 2.50/3.25 4.00/5.00 N 0.07/0.13
S35500 - 634 0.10/0.15 0.50 0.50/1.25 0.040 0.030 15.00/16.00 2.50/3.25 4.00/5.00 N 0.07/0.13
S41000 51410 410 0.15 1.00 1.00 0.040 0.030 11.5/13.5 - - -
S41040 - XM-30 0.18 1.00 1.00 0.040 0.030 11.0/13.0 - - Nb 0.05/0.30
S41400 51414 414 0.15 1.00 1.00 0.040 0.030 11.5/13.5 - 1.25/2.50 -
S41500 - - 0.05 0.60 0.50/1.00 0.030 0.030 11.5/14.0 0.50/1.00 3.5/5.5 -
S41600 51416 416 0.15 1.00 1.25 0.060 0.15 min 12.0/14.0 0.60 - Zr 0.60
S41610 - XM-6 (416 Plus X) 0.15 1.00 1.50/2.50 0.06 0.15 min 12.0/14.0 - - -
S41623 51416Se 416Se 0.15 1.00 1.25 0.060 0.060 12.0/14.0 - - Se 0.15 min
S42000 51420 420 0.15 min 1.00 1.00 0.040 0.030 12.0/14.0 - - -
S42010 - Trim Rite 0.15/0.30 1.00 1.00 0.040 0.030 13.5/15.00 0.40/0.85 0.35/0.85 -
S42020 51420F 420F 0.15 min 1.00 1.25 0.060 0.15 min 12.0/14.0 0.60 - -
S42023 51420FSe 420FSe 0.30/0.40 1.00 1.25 0.060 0.060 12.0/14.0 - - Se 0.15 min
S42900 51429 429 0.12 1.00 1.00 0.040 0.030 14.0/16.0 - - -
S43100 51431 431 0.20 1.00 1.00 0.040 0.030 15.0/17.0 - 1.25/2.50 -
S44002 51440A 440A 0.60/0.75 1.00 1.00 0.040 0.030 16.0/18.0 0.75 - -
S44003 51440B 440B 0.75/0.95 1.00 1.00 0.040 0.030 16.0/18.0 0,75 - -
S44004 51440C 440C 0.95/1.20 1.00 1.00 0.040 0.030 16.0/18.0 0.75 - -
S44020 51440F 440F 0.95/1.20 1.00 1.25 0.060 0.15 min 16.0/18.0 0.75 - Zr 0.75
S44023 51440FSe 440FSe 0.95/1.20 1.00 1.25 0.060 0.060 16.0/18.0 - - Se 0.15 min
S45000 - XM-25 Custom 450 0.05 1.00 1.00 0.030 0.030 14.00/16.00 0.50/1.00 5.00/7.00 Cu 1.25/1.75; Nb 8xC min
S45500 - XM-16 Custom 455 0.05 0.50 0.50 0.040 0.030 11.00/12.50 0.50 7.50/9.50 Cu 1.50/2.50; Nb 0.10/0.50
S45503 - - 0.010 0.20 0.50 0.010 0.010 11.00/12.50 0.50 7.50/9.50 Cu 1.50/2.50; Ti 1.00/1.35
S46500 - - 0.02 0.25 0.25 0.015 0.010 11.00/12.50 0.75/1.25 10.75/11.25 Mo 0.75/1.25; Ti 1.50/1.80
S66286 - A286 0.08 1.00 2.00 0.040 0.030 13.50/16.00 1.00/1.50 24.0/27.0 Al 0.35; B 0.0010/0.010; Ti 1.90/2.35; V 0.10/0.50

CARBON CONSTRUCTIONAL STEEL
GRADE CHEMICAL COMPOSITION
IS:DESIGNATION C Mn Si Cr Ni Mo
20c8 0.15 / 0.25 0.60 / 0.90 0.15 / 0.35
25c8 0.20 / 0.30 0.60 / 0.90 0.10 / 0.35
30c8 0.30 / 0.35 0.60 / 0.90 0.10 / 0.35
35c8 0.30 / 0.40 0.60 / 0.90 0.10 / 0.90
40c8 0.35 / 0.45 0.60 / 0.90 0.10 / 0.35
45c8 0.40 / 0.50 0.60 / 0.90 0.10 / 0.35
50c8 0.45 / 0.55 0.60 / 0.90 0.10 / 0.35
  ALLOY CONSTRUCTION STEEL
GRADE C Si Mn Cr V Mo
20c15 0.16 / 0.24 0.10 / 0.35 1.30 1.70
27c15 0.22 / 0.32 0.10 / 0.35 1.30 1.70
37c15 0.35 / 0.42 0.10 / 0.35 1.30 1.70
35Mn6Mo3 0.30 / 0.40 0.10 / 0.35 1.30 1.80 0.20 / 0.35
35Mn6Mo6 0.30 / 0.40 0.10 / 0.35 1.30 1.80 0.35 /0.55
40Cr4 0.35 / 0.45 0.10 / 0.35 0.60 / 0.90 0.90 / 1.20
35Ni5Cr2 0.30 / 0.40 0.10 / 0.35 0.60 / 0.90 0.45 / 0.75 1.0 / 1.50
SPRING STEEL
GRADE C Mn Si Cr V
55c8 0.50 / 0.60 0.60 / 0.90 0.10 / 0.35
36c17 0.33 / 0.40 0.80 / 1.0 1.50 / 2.00
55s17 05.0 / 0.60 0.80 / 1.0 1.50 / 2.00
50Cr4 0.45 / 0.55 0.60 / 0.90 0.10 / 0.35 0.90 / 1.20
50Cr4v2 0.45 / 0.55 0.50 / 0.80 0.10 / 0.35 0.90 / 1.20 0.15 / 0.30
EN45A 0.55 / 0.65 070 / 1.0 1.70 / 2.0
EN47 0.45 / 0.55 0.50 / 0.80 0.50 Max 0.80 / 1.20 0.15 Min
EN48 0.45 / 0.55 0.50 / 0.80 0.10 / 0.50 1.00 / 1.40
CARBON CHROME BEARING STEEL
GRADE C Si Mn Cr V
103Cr2 0.95 / 1.10 0.15 / 0.30 0.25 / 0.45 0.90 / 1.20
103CrMn70 0.95 / 1.10 0.15 / 0.30 0.60 / 0.80 1.50 / 1.70
AISI52100 0.98 / 1.10 0.15 / 0.35 0.25 / 0.45 1.30 / 1.60
EN31 0.90 / 1.20 0.10 / 0.35 0.30 / 0.75 1.00 / 1.60
HOTWORK TOOL STEEL
GRADE C Si Mn Cr V Mo S/P
H-11 0.35 / 0.45 0.90 / 0.10 0.20 / 0.35 5.0 / 5.5 0.30 1.50 0.025 MAX
H-12 0.35 / 0.45 0.90 / 0.10 0.20 / 0.35 5.0 / 5.5 0.30 1.50 0.025 MAX
H-13 0.35 / 0.45 0.90 / 0.10 0.20 / 0.35 5.0 / 5.5 1.0 / 1.2 1.50 0.025 MAX
CARBON TOOL STEEL
GRADE C Si Mn S P
T-70 0.65 / 0.75 0.20 / 0.30 0.25 / 0.35 0.03 MAX 0.03 MAX
T-90 0.85 / 0.95 0.20 / 0.30 0.20 / 0.30 0.03 MAX 0.03 MAX
T-103 0.90 / 1.1 0.20 / 0.30 0.20 / 0.30 0.03 MAX 0.03 MAX
AUSTENITIC STAINLESS STEEL
GRADE C ( MAX) Mn (MAX) P (MAX) S (MAX) Si (MAX) Cr Ni
ASTM
302 0.15 2.00 0.045 0.030 0.75 17.0 / 19.0 8.0 / 10.0
3.4 0.08 2.00 0.045 0.030 0.75 18.0 / 20.0 8.0 / 10.5
FERRITIC STAINLESS STEEL
GRADE C ( MAX) Mn (MAX) P (MAX) S (MAX) Si (MAX) Cr Ni
430 0.12 1.00 0.04 0.03 1.0 16.0 / 18.0 0.75
446 0.20 1.30 0.04 0.03 1.0 23.0 / 27.0
MARTENSITIC STAINLESS STEEL
GRADE C ( MAX) Mn (MAX) P (MAX) S (MAX) Si (MAX) Cr Ni
410 0.15 1.00 0.040 0.030 1.0 11.5 / 13.5 0.75
410S 0.80 1.00 0.040 0.030 1.0 11.5 / 13.5 0.60
414 0.15 1.00 0.040 0.030 1.0 15.0 / 17.0 1.25 / 2.50
431 0.20 1.00 0.040 0.030 1.0 15.0 / 17.0 1.25 / 2.50
HOTWORK TOOL STEEL
C Mn Si P S
1.0 / 1.30 11.0 / 14.0 0.60 MAX 0.07 MAX 0.05 MAX

Plastic Moulding Steels

PLASTIC MOULDING STEEL

DIN 1.2083, X40Cr14, ASTM / SAE / AISI 420, JIS SUS 420J2
DIN 1.2311, 40CrMnMo7, ASTM / SAE / AISI P20
DIN 1.2312, 40CrMnMoS8-6, ASTM / SAE / AISI P20+S
DIN 1.2316, X38CrMo16
DIN 1.2738, 40CrMnNiMo8-6-4, ASTM / SAE / AISI P20+Ni

 

Equivalent Grades
American
German
Japanese
China
Poland
(W.Nr.)
(DIN)
AISI P20
AISI P20+Ni
1.2311
1.2738
1.2767
40CrMnNiMo8-6-4
-
-
-



Chemical Composition (AISI P-20)
C
Si
Mn
P
S
Cr
Mo
V
W
Ni
AISI P20
AISI P20+Ni
0.35-0.45
0.20-0.40
1.30-1.60
-
-
1.80-2.10
0.15-0.25
-
-
0.90-1.20

 

 

Equivalent Grades
American
German
Japanese
China
Poland
(W.Nr.)
(DIN)
AISI P-20
AISI P-20+Ni
DIN 1.2311
DIN 1.2738
DIN 1.2767
40CrMnNiMo8-6-4
-
-
-



Chemical Composition (AISI P-20)
C
Si
Mn
P
S
Cr
Mo
V
W
Ni
AISI P-20
AISI P-20+Ni
0.35-0.45
0.20-0.40
1.30-1.60
-
-
1.80-2.10
0.15-0.25
-
-
0.90-1.20

Density

DENSITY OF STAINLESS STEEL

EN – DIN
W. Nr.
AISI
ASTM – UNS
AFNOR
®
Kg/dm3
Cr
X6Cr13
1.4000
410 S
S41008
Z 8 C 12
8,00
X6CrAl13
1.4002
405
S40500
Z 8 CA 12
8,00
X12CrS13
1.4005
416
S41600
Z 13 CF 13
8,00
X12Cr13
1.4006
410
S41000
Z 10 C 13
8,00
X6Cr17
1.4016
430
S43000
Z 8 C 17
8,00
X20Cr13
1.4021
420
S42000
Z 20 C 13
8,00
X15Cr13
1.4024
420 S
J91201
Z 15 C 13
8,00
X30Cr13
1.4028
420
J91153
Z 33 C 13
8,00
X46Cr13
1.4034
(420)
Z 44 C 14
8,00
X19CrNi17.2
1.4057
431
S43100
Z 15 CN 16.02
8,00
X14CrMoS17
1.4104
430 F
S43020
Z 13 CF 17
8,00
X90CrMoV18
1.4112
440 B
S44003
Z 90 CDV 18
8,00
X39 CrMo17.1
1.4122
Z 38 CD 16.01
8,00
X105CrMo17
1.4125
440 C
S44004/S44025
Z 100 CD 17
8,00
X5CrTi17
1.4510
430 Ti
S43036/S43900
Z 4 CT 17
8,00
X5CrNiCuNb16.4
1.4542/1.4548
630
S17400
Z 7 CNU 17.04
17.4 PH
8,00
X7CrNiAl17.7
1.4568
631
S17700
Z 9 CNA 17.07
17.7 PH
8,00
Cr + Ni
X5CrNi18.10
1.4301
304
S30400
Z 6 CN 18.09
8,00
X5CrNi18.12
1.4303
305
Z 8 CN 18.12
8,00
X10CrNiS18.9
1.4305
303
S30300
Z 10 CNF 18.09
8,00
X2CrNi19.11
1.4306
304 L
S30403
Z 3 CN 18.10
8,00
X12CrNi17.7
1.4310
301
S30100
Z 11 CN 18.08
8,00
X2CrNiN18.10
1.4311
304 LN
S30453
Z 3 CN 18.10 Az
8,00
X1CrNi25.21
1.4335
310 L
Z 1 CN 25.20
URANUS 65/ SS25L
8,00
X1CrNiSi18.15
1.4361
S30600
Z 1 CNS 17.15
URANUS S1/ ANTINIT
8,00
X6CrNiTi18.10
1.4541
321
S32100
Z 6 CNT 18.10
8,00
X6CrNiNb18.10
1.4550
347 (H)
S34700
Z 6 CNNb 18.10
8,00
Cr + Ni + Mo
X5CrNiMo17.12.2
1.4401
316
S31600
Z 7 CND 17.11.02
8,00
X2CrNiMo17.13.2
1.4404
316 L
S31603
Z 3 CND 18.12.02
8,00
X2CrNiMoN17.12.2
1.4406
316 LN
S31653
Z 3 CND 17.11 Az
8,00
X2CrNiMoN17.13.3
1.4429
316 LN (Mo+)
(S31653)
Z 3 CND 17.12 Az
8,00
X2CrNiMo18.14.3
1.4435
316 L (Mo+)
S31609
Z 3 CND 18.14.03
8,00
X5CrNiMo17.13.3
1.4436
316 (Mo+)
Z 6 CND 18.12.03
8,00
X2CrNiMo18.16.4
1.4438
317 L
S31703
Z 3 CND 19.15.04
8,00
X2CrNiMoN17.13.5
1.4439
317 LNM
S31726
Z 3 CND 18.14.05 Az
8,00
X5CrNiMo17.13
1.4449
(317)
Z 6 CND 17.12.04
8,00
X1CrNiMoN25.25.2
1.4465
N08310/S31050
Z 2 CND 25.25 Az
8,00
X1CrNiMoN25.22.2
1.4466
S31050
Z 2 CND 25.22 Az
8,00
X4NiCrMoCuNb20.18.2
1.4505
Z 5 NCDUNb 20.18
8,00
X5NiCrMoCuTi20.18
1.4506
Z 5 NCDUT 20.18
8,00
X1NiCrMoCuN25.20.6
1.4529
N08926
19.25 HMo
8,00
X1NiCrMoCu25.20.5
1.4539
904 L
N08904
Z 2 NCDU 25.20
URANUS B6 / 2 RK 65
8,00
X1CrNiMoCuN20.18.7
1.4547
S31254
Z 1 CNDU 20.18 Az
254 SMO
8,00
X1NiCrMoCu31.27.4
1.4563
N08028
Z 1 NCDU 31.27.03
SANICRO 28
8,00
X2CrNiMnMoNbN 25.18.5.4
1.4565
S34565
4565 S / 6 Mo
8,00
X6CrNiMoTi17.12.2
1.4571
316 Ti
S31635
Z 6 CNDT 17.12
8,00
X3CrNiMoTi25.25
1.4577
Z 5 CNDT 25.25
8,00
X6CrNiMoNb17.12.2
1.4580
316 Cb/Nb
S31640
Z 6 CNDNb 17.12
8,00
X10CrNiMoNb18.12
1.4583
318
Z 6 CNDNb 17.13
8,00
DUPLEX & SUPER-DUPLEX –
X2CrNiN23.4
1.4362
S32304
Z 3 CN 23.04 Az
URANUS 35N / SAF 23.04
8,00
X2CrNiMoN25.7.4
1.4410
S32750
Z 3 CND 25.06 Az
URANUS 47 N (+) SAF 25.07
8,00
X2CrNiMoN27.5.2
1.4460
329
S32900
Z 5 CN 27.05 Az
SS 44
8,00
X2CrNiMoN22.5.3
1.4462
(329 LN)/ F51
S31803/S32205
Z 3 CND 22.05 Az
URANUS 45N / SAF 2205
8,00
X2CrNiMoCuWN25.7.4
1.4501
F55
S32760
ZERON 100
8,00
X2CrNiMoCuN25.6.3
1.4507
F53
S32550/S32520
Z 3 CNDU 25.07 Az
URANUS 52 N (+)
8,00

Comparison of standardized steels

EN-standardSteel no. DIN EN-standardSteel name ASTM/AISISteel type UNS
440A S44002
1.4112 440B S44004
1.4125 440C S44003
440F S44020
1.4016 X6Cr17 430 S43000
1.4512 X6CrTi12 409 S40900
1.4310 X10CrNi18-8 301 S30100
1.4318 X2CrNiN18-7 301LN N/A
1.4307 X2CrNi18-9 304L S30403
1.4306 X2CrNi19-11 304L S30403
1.4311 X2CrNiN18-10 304LN S30453
1.4301 X5CrNi18-10 304 S30400
1.4948 X6CrNi18-11 304H S30409
1.4303 X5CrNi18 12 305 S30500
1.4541 X6CrNiTi18-10 321 S32100
1.4878 X12CrNiTi18-9 321H S32109
1.4404 X2CrNiMo17-12-2 316L S31603
1.4401 X5CrNiMo17-12-2 316 S31600
1.4406 X2CrNiMoN17-12-2 316LN S31653
1.4432 X2CrNiMo17-12-3 316L S31603
1.4435 X2CrNiMo18-14-3 316L S31603
1.4436 X3CrNiMo17-13-3 316 S31600
1.4571 X6CrNiMoTi17-12-2 316Ti S31635
1.4429 X2CrNiMoN17-13-3 316LN S31653
1.4438 X2CrNiMo18-15-4 317L S31703
1.4539 X1NiCrMoCu25-20-5 904L N08904
1.4547 X1CrNiMoCuN20-18-7 N/A S31254

Stainless steel grades

This list is incomplete; you can help by expanding it.
  • 200 Series—austenitic chromium-nickel-manganese alloys
    • Type 201—austenitic that is hardenable through cold working
    • Type 202—austenitic general purpose stainless steel
  • 300 Series—austenitic chromium-nickel alloys
    • Type 301—highly ductile, for formed products. Also hardens rapidly during mechanical working. Good weldability. Better wear resistance and fatigue strength than 304.
    • Type 302—same corrosion resistance as 304, with slightly higher strength due to additional carbon.
    • Type 303—easier machining version of 304 via addition of sulfur and phosphorus. Also referred to as “A1″ in accordance with International Organization for Standardization ISO 3506.[5]
    • Type 304—the most common grade; the classic 18/8 stainless steel. Also referred to as “A2″ in accordance with International Organization for Standardization ISO 3506.[5]
    • Type 304L—the 304 grade but specially modified for welding.
    • Type 309— better temperature resistance than 304
    • Type 316—the second most common grade (after 304); for food and surgical stainless steel uses; Alloy addition of molybdenum prevents specific forms of corrosion. 316 steel is used in the manufacture and handling of food and pharmaceutical products where it is often required in order to minimize metallic contamination. It is also known as “marine grade” stainless steel due to its increased resistance to chloride corrosion compared to type 304. SS316 is often used for building nuclear reprocessing plants. Most watches that are made of stainless steel are made of Type 316L; Rolex is an exception in that they use Type 904L. Also referred to as “A4″ in accordance with International Organization for Standardization ISO 3506.[5]
    • Type 321—similar to 304 but lower risk of weld decay due to addition of titanium. See also 347 with addition of niobium for desensitization during welding.
  • 400 Series—ferritic and martensitic chromium alloys
    • Type 405—a ferritic expecially made for welding applications
    • Type 408—heat-resistant; poor corrosion resistance; 11% chromium, 8% nickel.
    • Type 409—cheapest type; used for automobile exhausts; ferritic (iron/chromium only).
    • Type 410—martensitic (high-strength iron/chromium). Wear resistant, but less corrosion resistant.
    • Type 416— easy to machine due to additional sulfur
    • Type 420—”Cutlery Grade” martensitic; similar to the Brearley’s original “rustless steel”. Excellent polishability.
    • Type 430—decorative, e.g., for automotive trim; ferritic. Good formability, but with reduced temperature and corrosion resistance.
    • Type 440—a higher grade of cutlery steel, with more carbon in it, which allows for much better edge retention when the steel is heat treated properly. It can be hardened to around Rockwell 58 hardness, making it one of the hardest stainless steels. Due to its toughness and relatively low cost, most display-only and replica swords or knives are made of 440 stainless. Also known as “razor blade steel”. Available in four grades 440A, 440B, 440C, and the uncommon 440F (free machinable). 440A, having the least amount of carbon in it, is the most stain-resistant; 440C, having the most, is the strongest and is usually considered a more desirable choice in knifemaking than 440A except for diving or other salt-water applications.
    • Type 446—For elevated temperature service
  • 500 Series—heat resisting chromium alloys
  • 600 Series—martensitic precipitation hardening alloys
    • Type 630—most common PH stainless, better known as 17-4; 17% chromium, 4% nickel

Stainless steel finishes

Standard mill finishes can be applied to flat rolled stainless steel directly by the rollers and by mechanical abrasives. Steel is first rolled to size and thickness and then annealed to change the properties of the final material. Any oxidation that forms on the surface (scale) is removed by pickling, and the passivation layer is created on the surface. A final finish can then be applied to achieve the desired aesthetic appearance.

  • No. 0 – Hot Rolled Annealed, thicker plates
  • No. 1 – Hot rolled, annealed and passivated
  • No, 2D – cold rolled, annealed, pickled and passivated
  • No, 2B – same as above with additional pass through polished rollers
  • No, 2BA – Bright Anealed (BA) same as above with highly polished rollers
  • No. 3 – coarse abrasive finish applied mechanically
  • No. 4 – brushed finish
  • No. 6 – matte finish
  • No. 7 – reflective finish
  • No. 8 – mirror finish
  • No. _ – bead blast finish

BS970 Specifications

BS-970 SPECIFICATION

BS970 – 1955 SPECIFICATIONS
Grade C Mn Si Cr Ni Mo S P Others
EN1A 0.07/0.15 0.80/1.20 0.10 M 0.20/0.30 0.07
EN1B 0.07/0.15 1.00/1.40 0.10 M 0.30/0.60 0.06
EN1AL 0.07/0.15 0.80/1.20 0.10 M 0.20/0.30 0.07 Pb-0.15/0.35
EN2 0.20 M 0.80 M 0.06 0.06
EN2A 0.12 M 0.50 M 0.05 0.05
EN2A/1 0.10 M 0.50 M 0.04 0.04
EN2B 0.15 M 0.50 M 0.05 0.05
EN2C 0.15/0.25 0.40/0.60 0.05 0.05
EN2D 0.15/0.30 0.40/0.70 0.05 0.05
EN2E 0.15 M 0.50 M 0.10/0.35 0.05 0.05
EN3 0.25 M 1.00 M 0.05/0.35 0.06 0.06
EN3A 0.15/0.25 0.40/0.90 0.05/0.35 0.06 0.06
EN3B 0.25 M 1.00 M 0.35 M 0.06 0.06
EN3C 0.17/0.23 0.60/1.00 0.05/0.35 0.05 0.05
EN3D 0.15/0.25 0.60/1.00 0.05/0.35 0.06 0.06
EN4 0.30 M 1.00 M 0.05/0.35 0.06 0.06
EN4A 0.30 M 1.00 M 0.05/0.35 0.06 0.06
EN5 0.25/0.35 0.60/1.00 0.05/0.35 0.06 0.06
EN5K 0.25/0.35 0.60/1.00 0.05/0.35 0.05 0.05
EN5A 0.25/0.30 0.70/0.90 0.05/0.35 0.06 0.06
EN5B 0.28/0.33 0.70/0.90 0.05/0.35 0.06 0.06
EN5C 0.30/0.35 0.70/0.90 0.05/0.35 0.06 0.06
EN5D 0.25/0.35 0.60/1.00 0.05/0.35 0.06 0.06
EN6 0.40 M 0.50/0.90 0.05/0.35 0.06 0.06
EN6K 0.40 M 0.50/0.90 0.05/0.35 0.06 0.06
EN6A 0.40 M 0.50/0.90 0.05/0.35 0.06 0.06
EN7 0.10/0.30 1.00/1.30 0.25 M 0.10/0.18 0.06
EN7A 0.12/0.18 1.00/1.50 0.25 M 0.10/0.18 0.06
EN8 0.35/0.45 0.60/1.00 0.05/0.35 0.06 0.06
EN8A 0.33/0.38 0.70/0.90 0.05/0.35 0.06 0.06
EN8B 0.35/0.40 0.70/0.90 0.05/0.35 0.06 0.06
EN8C 0.38/0.43 0.70/0.90 0.05/0.35 0.06 0.06
EN8D 0.40/0.45 0.70/0.90 0.05/0.35 0.06 0.06
EN8E 0.35/0.40 0.90/1.10 0.05/0.35 0.06 0.06
EN8K 0.35/0.45 0.60/1.00 0.05/0.35 0.05 0.05
EN8M 0.35/0.45 1.00/1.30 0.25 M 0.12/0.20 0.06
EN8AM 0.33/0.38 0.90/1.30 0.25 M 0.12/0.20 0.06
EN8BM 0.35/0.40 0.90/1.30 0.25 M 0.12/0.20 0.06
EN8CM 0.38/0.43 0.90/1.30 0.25 M 0.12/0.20 0.06
EN8DM 0.40/0.45 0.90/1.30 0.25 M 0.12/20 0.06
EN9 0.50/0.60 0.50/0.80 0.05/0.35 0.06 0.06
EN9K 0.50/0.60 0.50/0.80 0.05/0.35 0.05 0.05
EN10 0.50/0.60 0.50/0.80 0.05/0.35 0.50/0.80 0.06 0.06
EN11 0.50/0.70 0.50/0.80 0.10/0.35 0.50/0.80 0.05 0.05
EN12 0.30/0.45 1.50 M 0.10/0.35 0.60/1.00 0.05 0.05
EN12A 0.30/0.35 0.70/0.90 0.10/0.35 0.60/1.00 0.05 0.05
EN12B 0.35/0.40 0.70/0.90 0.10/0.35 0.60/1.00 0.05 0.05
EN12C 0.40/0.45 0.70/0.90 0.10/0.35 0.60/1.00 0.05 0.05
EN13 0.15/0.25 1.40/1.80 0.10/0.35 0.40/0.70 0.15/0.35 0.05 0.05
EN14A 0.15/0.25 1.30/1.70 0.10/0.35 0.25 M 0.40 M 0.06 0.06
EN14A/1 0.23 M 1.20 Min 0.05/0.35 0.06 0.06
EN14B 0.20/0.30 1.30/1.70 0.10/0.35 0.40 M 0.06 0.06
EN15 0.30/0.40 1.30/1.70 0.10/0.35 0.05 0.05
EN15A 0.30/0.40 1.30/1.70 0.05/0.35 0.06 0.06
EN15AM 0.30/0.40 1.30/1.70 0.25 M 0.12/0.20 0.06
EN15B 0.35/0.40 1.10/1.30 0.05/0.35 0.06 0.06
EN16 0.30/0.40 1.30/1.80 0.10/0.35 0.20/0.35 0.05 0.05
EN16A 0.25/0.30 1.30/1.80 0.10/0.35 0.20/0.35 0.05 0.05
EN16B 0.30/0.35 1.30/1.80 0.10/0.35 0.20/0.35 0.05 0.05
EN16C 0.35/0.40 1.30/1.80 0.10/0.35 0.20/0.35 0.05 0.05
EN16M 0.30/0.40 1.30/0.80 0.25 M 0.20/0.35 0.12/0.20 0.05
EN17 0.30/0.40 1.30/1.80 0.10/0.35 0.35/0.55 0.05 0.05
EN18 0.35/0.45 0.60/0.95 0.10/0.35 0.85/1.15 0.05 0.05
EN18A 0.27/0.32 0.65/0.80 0.10/0.35 0.85/1.15 0.05 0.05
EN18B 0.30/0.35 0.65/0.80 0.10/0.35 0.85/1.15 0.05 0.05
EN18C 0.35/0.38 0.65/0.80 0.10/0.35 0.85/1.15 0.05 0.05
EN18D 0.38/0.43 0.65/0.80 0.10/0.35 0.85/1.15 0.05 0.05
EN19 0.35/0.45 0.50/0.80 0.10/0.35 0.90/1.50 0.20/0.40 0.05 0.05
EN19A 0.35/0.45 0.50/0.80 0.10/0.35 0.90/1.50 0.20/0.35 0.05 0.05
EN19B 0.35/0.45 0.50/0.80 0.10/0.35 0.90/1.50 0.20/0.35 0.05 0.05
EN19C 0.40/0.45 0.50/0.80 0.10/0.35 0.90/1.50 0.20/0.35 0.05 0.05
EN20A 0.20/0.30 0.40/0.70 0.10/0.35 0.50/1.00 0.50/0.80 0.05 0.05
EN20B 0.35/0.45 0.40/0.70 0.10/0.35 0.50/1.00 0.50/0.80 0.05 0.05
EN21 0.25/0.35 0.35/0.75 0.10/0.35 0.30 M 2.75/3.25 0.05 0.05
EN21A 0.20/0.30 0.60 M 0.10/0.35 2.50/3.50 0.05 0.05
EN22 0.35/0.45 0.50/0.80 0.10/0.35 0.30 M 3.25/3.75 0.5 0.05
EN23 0.25/0.35 0.45/0.70 0.10/0.35 0.50/1.00 2.75/3.50 0.65 M 0.05 0.05
EN24 0.35/0.45 0.45/0.70 0.10/0.35 0.90/1.40 1.30/1.80 0.20/0.35 0.05 0.05
EN25 0.27/0.35 0.50/0.70 0.10/0.35 0.50/0.80 2.30/2.80 0.40/0.70 0.05 0.05
EN26 0.36/0.44 0.50/0.70 0.10/0.35 0.50/0.80 2.30/2.80 0.40/0.70 0.05 0.05
EN27 0.25/0.35 0.70 M 0.10/0.35 0.50/1.30 3.00/3.75 0.20/0.65 0.05 0.05
EN28 0.25/0.40 0.70 M 0.10/0.35 0.75/1.50 3.00/4.50 0.20/0.65 0.05 0.05
EN29A 0.15/0.25 0.65 M 0.10/0.35 2.50/3.50 0.40 M 0.30/0.70 0.05 0.05
EN29B 0.25/0.35 0.65 M 0.10/0.35 2.50/3.50 0.40 M 0.30/0.70 0.05 0.05
EN30A 0.26/0.34 0.40/0.60 0.10/0.35 1.10/1.40 3.90/4.30 0.05 0.05
EN30B 0.26/0.34 0.40/0.60 0.10/0.35 1.10/1.40 3.90/4.30 0.20/0.40 0.05 0.05
EN31 0.90/1.20 0.30/0.75 0.10/0.35 1.00/1.60 0.05 0.05
EN32A 0.15 M 0.40/0.70 0.05/0.35 0.05 0.05
EN32B 0.10/0.18 0.60/1.00 0.05/0.35 0.07 0.05
EN32C 0.10/0.18 0.60/1.00 0.05/0.35 0.05 0.05
EN32M 0.10/0.18 0.60/1.00 0.05/0.35 0.10/0.15 0.05
EN33 0.10/0.15 0.30/0.60 0.10/0.35 0.30 M 2.75/3.50 0.05 0.05
EN34 0.14/0.20 0.30/0.60 0.10/0.35 1.50/2.00 0.20/0.30 0.05 0.05
EN35 0.20/0.28 0.30/0.60 0.10/0.35 1.50/2.00 0.20/0.30 0.05 0.05
EN35A 0.30/0.25 0.30/0.60 0.10/0.35 1.50/2.00 0.20/0.30 0.05 0.05
EN35B 0.23/0.28 0.30/0.60 0.10/0.35 1.50/2.00 0.20/0.30 0.05 0.05
EN36A 0.15 M 0.30/0.60 0.10/0.35 0.60/1.10 3.00/3.75 0.05 0.05
EN36B 0.12/0.18 0.30/0.60 0.10/0.35 0.60/1.10 3.00/3.75 0.05 0.05
EN36C 0.12/0.18 0.30/0.60 0.10/0.35 0.60/1.10 3.00/3.75 0.10/0.25 0.05 0.05
EN37 0.16 M 0.45 M 0.10/0.35 0.30 M 4.5/5.20 0.05 0.05
EN38 0.16 M 0.60 M 0.10/0.35 0.30 M 4.5/5.20 0.15/0.30 0.05 0.05
EN39A 0.12/0.18 0.50 M 0.10/0.35 1.00/1.40 3.80/4.50 0.05 0.05
EN39B 0.12/0.18 0.50 M 0.10/0.35 1.00/1.40 3.80/4.50 0.15/0.35 0.05 0.05
EN40A 0.10/0.20 0.40/0.65 0.10/0.35 2.90/3.50 0.40 M 0.40/0.70 0.05 0.05
EN40B 0.20/0.30 0.40/0.65 0.10/0.35 2.90/3.50 0.40 M 0.40/0.70 0.05 0.05
EN40C 0.30/0.50 0.40/0.80 0.10/0.35 2.50/3.50 0.40 M 0.70/1.20 0.05 0.05
EN41A 0.25/0.35 0.65 M 0.10/0.45 1.40/1.80 0.40 M 0.10/0.25 0.05 0.05
EN42 0.70/0.85 0.55/0.75 0.10/0.40 0.05 0.05
EN42B 0.60/0.70 0.55/0.80 0.35 M 0.05 0.05
EN42C 0.70/0.80 0.55/0.80 0.35 M 0.05 0.05
EN42D 0.80/0.90 0.55/0.80 0.35 M 0.05 0.05
EN42E 0.60/0.75 0.30/0.60 0.35 M 0.05 0.05
EN42F 0.60/0.75 0.60/0.90 0.35 M 0.05 0.05
EN42G 0.75/0.90 0.30/0.60 0.35 M 0.05 0.05
EN42J 0.75/0.90 0.60/0.90 0.35 M 0.05 0.05
EN43 0.45/0.55 0.70/1.00 0.05/0.35 0.06 0.06
EN43B 0.45/0.50 0.70/1.00 0.05/0.35 0.06 0.06
EN43C 0.50/0.55 0.70/1.00 0.05/0.35 0.06 0.06
EN43D 0.60/0.65 0.40/0.60 0.05/0.35 0.06 0.06
EN43E 0.65/0.70 0.70/0.90 0.05/0.35 0.06 0.06
EN43G 0.45/0.60 0.30/0.60 0.35 M 0.05 0.05
EN43J 0.45/0.60 0.60/0.90 0.35 M 0.05 0.05
EN44 0.90/1.20 0.40/0.70 0.30 M 0.05 0.05
EN44B 0.90/1.20 0.40/0.70 0.35 M 0.05 0.05
EN44C 1.00/1.20 0.40/0.70 0.35 M 0.05 0.05
EN44D 0.90/1.05 0.30/0.70 0.35 M 0.05 0.05
EN44E 1.05/1.25 0.30/0.70 0.35 M 0.05 0.05
EN45 0.55/0.60 0.70/1.00 1.50/2.00 0.05 0.05
EN45A 0.55/0.65 0.70/1.00 1.70/2.00 0.05 0.05
EN46 0.35/0.45 0.70/1.00 1.50/2.00 0.05 0.05
EN48 0.45/0.55 0.50/0.80 0.10/0.50 1.00/1.40 0.05 0.05
EN48A 0.50/0.60 0.60/0.90 1.35/1.65 0.55/0.85 0.05 0.05
EN49A 0.40/0.85 1.00 M 0.30 M 0.05 0.05
EN49B 0.45/0.85 1.00 M 0.30 M 0.05 0.05
EN49C 0.55/0.85 0.75 M 0.30 M 0.04 0.04
EN49D 0.65/0.85 0.75 M 0.30 M 0.04 0.04
EN50 0.40/0.50 0.50/0.70 0.10/0.35 1.00/1.50 0.04 0.04
EN51 0.25/0.35 0.35/0.75 0.10/0.35 0.30 M 2.75/3.25 0.05 0.05
EN52 0.40/0.50 0.30/0.60 3.00/3.75 7.50/9.50 0.50 M 0.04 0.04
EN53 0.55/0.65 0.30/0.60 1.40/1.70 5.75/6.75 0.50 M 0.05 0.05
EN54 0.35/0.50 1.50 M 1.00/2.509 12.0/16.0 10.0 M 0.04 0.04
EN54A 0.37/0.47 0.50/0.80 1.00/2.00 13.0/15.0 13.0/15.0 0.40/0.60 0.04 0.04
EN55 0.18/0.45 1.00 MAX 1.00/2.50 17.0 Min 6.0/12.0 0.04 0.04
EN56A 0.12 M 1.00M 1.00 M 12.0/14.0 1.00 M 0.04 0.04
EN56B 0.12/0.18 1.00 M 1.00 M 12.0/14.0 1.00 M 0.04 0.04
EN56C 0.18/0.25 1.00 M 1.00 M 12.0/14.0 1.00 M 0.04 0.04
EN56D 0.25/0.35 1.00 M 1.00 M 12.0/14.0 1.00 M 0.04 0.04
EN56AM 0.12 M 1.50 M 1.00 M 12.0/14.0 1.00 M 0.75 0.04
EN56BM 0.12/0.18 1.50 M 1.00 M 12.0/14.0 1.00 M 0.75 0.04
EN56CM 0.18/0.25 1.50 M 1.00 M 12.0/14.0 1.00 M 0.75 0.04
EN56DM 0.25/0.35 1.50 M 1.00 M 12.0/14.0 1.00 M 0.75 0.04
EN57 0.25 M 1.00 M 0.10/1.00 15.5/20.0 1.0/3.0 0.04 0.04
EN58A 0.16 M 2.00 M 0.20 min 17.0/20.0 7.0/10.0 0.04 0.04
EN58B 0.15 M 2.00 M 0.20 min 17.0/20.0 7.0/10.0 0.04 0.04
EN58C 0.15 M 2.00 M 0.20 min 17.0/20.0 9.0/12.0 0.04 0.04
EN58D 0.16 M 2.00 M 0.20 M 11.0/14.0 11.0/14.0 0.04 0.04
EN58E 0.08M 2.00 M 0.20 M 17.5/20.0 8.0/11.0 0.04 0.04
EN58F 0.15 M 2.00 M 0.20 M 17.0/20.0 7.0/10.0 0.04 0.04
EN58G 0.15 M 2.00 M 0.20 M 17.0/20.0 9.0/12.0 0.04 0.04
EN58H 0.12 M 2.00 M 0.20 M 17.0/20.0 8.0/12.0 1.50/2.50 0.04 0.04
EN58J 0.12 M 2.00 M 0.20 M 17.0/20.0 8.0/12.0 2.50/3.50 0.04 0.04
EN59 0.74/0.84 0.20/0.60 1.75/2.25 19.0/20.5 1.15/1.65 0.03 0.03
EN60 0.12 M 1.00 M 1.00 M 16.0/18.0 0.50 M 0.04 0.04
EN61 0.12 M 1.00 M 1.00 M 20.0/22.0 0.50 M 0.04 0.04
EN100 0.35/0.45 1.20/1.50 0.50 M 0.30/0.60 0.50/1.00 0.15/0.25 0.05 0.05
EN100A 0.25/0.35 1.20/1.50 0.10/0.50 0.30/0.60 0.50/1.00 0.15/0.25 0.05 0.05
EN100B 0.30/0.35 1.20/1.50 0.10/0.50 0.30/0.60 0.50/1.00 0.15/0.25 0.05 0.05
EN100C 0.35/0.40 1.20/1.50 0.10/0.50 0.30/0.60 0.50/1.00 0.15/0.25 0.05 0.05
EN100D 0.40/0.45 1.20/1.50 0.10/0.50 0.30/0.60 0.50/1.00 0.15/0.25 0.05 0.05
EN100E 0.25/0.35 1.20/1.50 0.50 M 0.30/0.60 0.50/1.00 0.15/0.25 0.05 0.05
EN110 0.35/0.45 0.40/0.80 0.10/0.35 0.90/1.40 1.20/1.60 0.10/0.20 0.05 0.05
EN111 0.30/0.40 0.60/0.90 0.10/0.35 0.45/0.75 1.00/1.50 0.05 0.05
EN111A 0.33/0.38 0.60/0.90 0.10/0.35 0.45/0.75 1.00/1.50 0.05 0.05
EN160 0.35/0.45 0.30/0.60 0.10/0.35 1.50/2.00 0.20/0.35 0.05 0.05
EN160A 0.38/0.43 0.30/0.60 0.10/0.35 1.50/2.00 0.20/0.35 0.05 0.05
EN201 0.18 M 1.10/1.50 0.05/0.35 0.05 0.05
EN202 0.18 M 1.20/1.50 0.05/0.35 0.10/0.18 0.05
EN206 0.12/0.17 0.30/0.50 0.10/0.35 0.30/0.50 0.05 0.05
EN207 0.16/0.21 0.60/0.80 0.10/0.35 0.60/0.80 0.05 0.05
EN325 0.22 M 0.45/0.65 0.10/0.35 0.40/0.60 1.50/2.0 0.20/0.30 0.05 0.05
EN351 0.20 M 0.60/1.00 0.35 M 0.40/0.80 0.60/1.00 0.10 M 0.05 0.05
EN352 0.20 M 0.50/1.00 0.35 M 0.60/1.00 0.85/1.25 0.10 M 0.05 0.05
EN353 0.20 M 0.50/1.00 0.35 M 0.75/1.25 1.00/1.50 0.08/0.15 0.05 0.05
EN354 0.20 M 0.50/1.00 0.35 M 0.75/1.25 1.50/2.00 0.10/0.20 0.05 0.05
EN355 0.20 M 0.40/0.70 0.35 M 1.40/1.70 1.80/2.20 0.10/0.25 0.05 0.05
EN361 0.13/0.17 0.70/1.00 0.35 M 0.55/0.80 0.40/0.70 0.08/0.15 0.05 0.05
EN362 0.18/0.23 0.70/1.00 0.35 M 0.55/0.80 0.40/0.70 0.08/0.15 0.05 0.05
EN363 0.22/0.26 0.70/1.00 0.35 M 0.55/0.80 0.40/0.70 0.08/0.15 0.05 0.05